说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 落锤锻
1)  drop forge
落锤锻
2)  hammer forging
锤锻
1.
An analysis of cracking of turbine disk during hammer forging is presented by using the numerical simulation technology in this paper.
根据GH4 133B高温材料试验结果 ,应用数值模拟技术对高温合金一级涡轮盘锤锻工艺进行了数值模拟 ,模拟结果揭示出 :初锻温度较低、锤的间隔时间和运料时间较长可能是引起开裂的重要原因。
3)  forging hammer
锻锤
1.
The analysis on the vibration and the antivibration measures of industrial forging hammer foundation;
工业锻锤基础振动分析及防振措施
2.
This paper has studied the vibration isolation of divided anvil of forging hammer.
对砧座分层的锻锤进行了隔振研究结果表明:如果上下砧的材料和截面能满足阻抗匹配条件,剩余打击冲量就可以全部透射到下砧中,而保持上砧不动,实现工作台高度稳定;通过支承刚度和阻尼参数的合理选择,一方面能保证隔振效果,另一方面又能确保下砧回弹时不对上砧产生冲撞
3.
The actual data are gathered of anvil amplitude of vibration-isolatedhammers used at home and abroad and an investigation on the operation is also made ofsuch forging hammers used in our country.
汇集了有关锻锤砧下直接隔振后砧座振幅的实际数据,考察了国内砧下直接隔振锻锤的工作情况,由理论分析和实践证实,将锻锤砧座振幅增大到10~20mm既不影响生产操作又不影响打击效率,而能获得良好的隔振效果。
4)  hammer [英]['hæmə(r)]  [美]['hæmɚ]
锻锤
1.
Using the mathematically analytical method,a mathematical expression of the hammer-base amplitude is derived by way of establishing a vibrational damping-free mechanical model of dual-degree of freedom.
通过建立锻锤基础无阻尼双自由度振动力学模型,利用数学分析的方法,导出了锻锤基础振幅的数学表达式该式是锻锤隔振系统参数设计是否合理的重要判据
5)  DWTT
落锤
1.
Cause Analysis on Unqualified DWTT of L360MB Pipeline Steel;
管线钢L360MB落锤不合格原因浅析
2.
Cause Analysis of Unqualified DWTT of X70 Pipeline Steel;
X70管线钢落锤不合格原因浅析
3.
Size, distributing, morphology and number of the MA island influencing yield ratio, yield strength and DWTT of the pipeline steel are introduced in the paper by analyzing influence of the MA island on mechanical properties in X70 and X65 pipeline steel.
通过力学试验研究分析管线钢X70、X65中重要组分MA岛对力学性能的影响,得出MA岛的尺寸、分布、形态、数量对管线钢的屈强比、屈服强度、落锤影响的规律。
6)  drop hammer
落锤
1.
Study of drop hammer impact sensitivity for big-bill explosives;
大药片落锤撞击感度研究
2.
Study on equipment for drop hammer dynamic tear test;
落锤式动态撕裂试验装置
3.
This paper mainly deals with the key technologies involved in a guide tracked drop hammer breaker, including the working mechanism of the drop hammer, the design conception and working principle of the hydraulic control system, Indoor tests conducted on the prototype show that main parameters have met the design requirements.
本文重点论述了导轨式落锤碎石机的关键技术─-落锤工作机构及其液控系统的设计思路、工作原理。
补充资料:锤锻
1.亦作"锤锻"。 2.锻造﹔锤击。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条