1) breakdown slip
临界转差率
2) breakdown slip
极限转差率，临界转差率
3) critical conversion
临界转化率
1.
WT5BZ]According to the criterion reported by Turner,the factors affecting the critical conversion X 1 transited from low conversion stage to gel effect stage and the expression for use in the correlation of X 1 are determined.
基于Turner提出的准则 ,确定了关联临界转化率X1 的关系式。
4) critical temperature difference
临界温差
1.
Based on the critical stress fracture criterion and by means of the calculation of the time for the surface of the functionally gradient ceramie plate to attain its local fracture strength, the expression of the critical temperature difference △Tc leading to the critical t.
基于陶瓷材料的临界应力断裂判据,通过求解无限大对称型梯度功能陶瓷平板表面达到其局部断裂强度的时间,建立了引起其表面临界热应力的临界温差ΔT_c的表达式,并以此作为对称型梯度功能陶瓷的抗热震参数。
2.
The critical temperature differences (ΔTC) of various sample thicknesses are obtained, which shows that the critical temperature differences decrease gradually with the increasing plate thick.
通过实验研究了ZrB2-20%SiC-10%AlN(ZSA)超高温陶瓷基复合材料的热物理性能、力学性能和其热冲击开裂过程,确定了不同厚度试样热冲击开裂的临界温差;随着试样厚度的增加,热冲击开裂的临界温差逐渐降低。
5) critical pressure differential
临界压差
1.
The analysis of critical pressure differential of one gas fie.
通过气藏孔隙压力和岩石骨架应力分布规律分析,以Bratli孔穴稳定准则为出砂判据,建立了固结砂岩储层气井裸眼完井出砂临界压差的确定准则,并利用该准则对南海某气田出砂临界压差进行了分析评价,为最大限度地提高气井产量,减少气井出砂对管壁冲蚀提出了可靠依据。
6) critical slip
临界滑差
1.
Study on the effect of load rates and critical slips in the aggregation of induction motors in transient stability simulation shows that the two aspects have great influence on the accuracy of aggregation.
感应电动机群中的各电动机初始滑差不同对聚合结果有重要影响,而该初始滑差由负载率和临界滑差联合决定。
2.
In this paper, the parameters of the induction motors are aggregated using the weighting-mean method based on the capacity, load rate and critical slip, and the subtransmission network is considered in load aggregation using the massive data in power system.
采用考虑计及负载率和临界滑差的改进容量加权法来聚合感应电动机负荷,利用当前电力系统多数据源的状况来计及供配电网络的影响。
补充资料：临界转化率
分子式：
CAS号：
性质：在非线性逐步聚合反应中发生凝胶化时的转化率。其数值可以从理论计算得到。常用的方法有从改进的Carothers方程计算或从支化系数作统计考虑。两种方法得到的临界转化率并不相同，而一些实验测定的数值介乎这两种理论计算值之间。
CAS号：
性质：在非线性逐步聚合反应中发生凝胶化时的转化率。其数值可以从理论计算得到。常用的方法有从改进的Carothers方程计算或从支化系数作统计考虑。两种方法得到的临界转化率并不相同，而一些实验测定的数值介乎这两种理论计算值之间。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条