2) vacuum casting
真空浇注
1.
Study of Polyurethane Resin with Heat Resistance for Vacuum Casting Manufacture;
真空浇注耐热聚氨酯材料的研究
2.
Two types of two components polyurethane resins(PU) for vacuum casting were synthesized by one-step method and quasi-prepolymer method respectively.
利用二苯基甲烷二异氰酸酯(MDI)、液化MDI、聚醚多元醇及小分子扩链剂、交联扩链剂,分别采用半预聚物法及一步法合成了两类适用于硅胶模真空浇注成型的二组分聚氨酯(PU)树脂。
3.
A water modeling experiment on vacuum casting from tundish was carried out.
对真空浇注下结晶器内流体流动行为进行了研究。
3) Vacuum pouring
真空浇注
1.
Using the vacuum pouring process,the vacuum pouring equipment was developed.
采用了真空浇注工艺,开发了真空浇注设备。
2.
For the molten steel with lower carbon and oxygen activity,the vacuum pouring process with tundish plug rod blowing argon has been developed in order to decrease the hydrogen content in steel more effectively.
真空浇注系统能有效去除钢液中的氢。
4) Vacuum casting
真空注型
1.
Material selection and process discussion of vacuum casting in automotive air intake manifold
汽车进气歧管真空注型材料选用和工艺探讨
2.
To study the processing of Vacuum casting with Moldflow,flow and warp analysis is carried out.
应用Moldflow软件对硅胶模真空注型过程进行了流动填充分析和翘曲变形分析,拓展了MPI的应用范围。
5) vacuum impregnation
真空注入
1.
In this paper,the effects of high-methoxyl pectin(HMP),honey and lactate calcium(LC) on physicochemical properties,texture,colour and drip loss of fresh-cut Yellow Peach were studied under vacuum impregnation conditions.
采用真空注入技术,对高甲氧基果胶(HMP)、蜂蜜和乳酸钙(LC)对鲜切黄桃的理化性质和色泽、以及对冰冻黄桃的硬度和解冻后汁液流失的影响进行了试验研究。
2.
Sol was filled in pores of AAO by vacuum impregnation.
溶胶是通过真空注入法被填充到模板的纳米孔洞中的,通过高温热处理,形成 CoFe_2O_4 纳米线阵列。
6) Vacuum casting
真空注浆
1.
The dense yittria-stabilized zirconia and alumina membrane tube was prepared using pyridine as dispersant by vacuum casting, which the thickness of the membrane was 0.
以吡啶为分散剂 ,采用真空注浆法制备出膜厚为 0 。
补充资料：真空注浆成型
分子式：
CAS号：
性质：又称减压注浆成型。在注浆模外加金属夹套与真空系统管路相连接以降低模外的压力，有利于泥浆水分快速排出。采用真空注浆可缩短注浆周期，减少坯体内气孔，提高坯体致密度和强度。
CAS号：
性质：又称减压注浆成型。在注浆模外加金属夹套与真空系统管路相连接以降低模外的压力，有利于泥浆水分快速排出。采用真空注浆可缩短注浆周期，减少坯体内气孔，提高坯体致密度和强度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条