1) moulding by vacuum casting
真空注浆成型
2) Vacuum casting
真空注浆
1.
The dense yittria-stabilized zirconia and alumina membrane tube was prepared using pyridine as dispersant by vacuum casting, which the thickness of the membrane was 0.
以吡啶为分散剂 ,采用真空注浆法制备出膜厚为 0 。
3) Vacuum Assisted Resin Infusion
真空灌注成型
1.
According to Darcy s Law,a special device to measure the permeability of glass mat reinforcements in Vacuum Assisted Resin Infusion(VARI)is designed,and different methods are presented for one-dimenisonal and in-plane permeability measurement.
本文依据Darcy定律为理论依据,结合实验室现有条件,自已设计了一套实验方案,采用不同测试方法、不同参数研究了一维、二维方向下真空灌注成型渗透率的计算方法。
4) vacuum casting method
真空注浆法
1.
2mm were made by the vacuum casting method.
用真空注浆法制备出膜厚为０。
5) slip casting
注浆成型
1.
Anode supported SOFCs prepared by slip casting technique and its performance;
注浆成型制备阳极支撑型SOFC及其性能
2.
Cone-shaped cylindrical anode supported SOFCs by slip casting formation method;
注浆成型法制备阳极支撑锥管状SOFC
3.
Crucible samples are formed by slip casting with that materials.
以注浆成型法制备感应炉坩埚,考察所制得样品的理化性能。
6) Vacuum casting
真空注型
1.
Material selection and process discussion of vacuum casting in automotive air intake manifold
汽车进气歧管真空注型材料选用和工艺探讨
2.
To study the processing of Vacuum casting with Moldflow,flow and warp analysis is carried out.
应用Moldflow软件对硅胶模真空注型过程进行了流动填充分析和翘曲变形分析,拓展了MPI的应用范围。
补充资料：真空注浆成型
分子式：
CAS号：
性质：又称减压注浆成型。在注浆模外加金属夹套与真空系统管路相连接以降低模外的压力，有利于泥浆水分快速排出。采用真空注浆可缩短注浆周期，减少坯体内气孔，提高坯体致密度和强度。
CAS号：
性质：又称减压注浆成型。在注浆模外加金属夹套与真空系统管路相连接以降低模外的压力，有利于泥浆水分快速排出。采用真空注浆可缩短注浆周期，减少坯体内气孔，提高坯体致密度和强度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条