1) hard firing
硬性点火
2) ignition property
点火性能
1.
The dampproof coating has not effect on ignition property of propellant.
0×10~(-13)g·cm/(m~2·s·Pa),能有效阻止湿气扩散到推进剂内部,这种保护涂层有效地降低了湿气对推进剂性能的影响,延缓推进剂的老化,而对推进剂点火性能无明显影响。
2.
To improve its performance,the effect of potassium picrate on thermal behavior and ignition property of nitramine powder containing RDX was studied by DSC and a small closed bomb test.
为改善含RDX硝胺火药存在的低压点火难、燃烧压力前沿上升慢的问题,采用差示扫描量热仪(DSC)和小型密闭爆发器装置,研究了苦味酸钾(KP)对含RDX硝铵火药热行为及其点火性能的影响。
3) Ignition performance
点火性能
1.
In order to obtain good ignition performance of the nitramine propellant,certain amount of potassium picrate with strong ignition ability was added.
为使硝胺类输出药获得较好的点火性能,在配方中添加点火能力强的苦味酸钾制成混合药剂,设计了三种配方,并进行了点火性能试验,得到点火延迟期分别为1。
2.
The ignition performance of fuel-rich propellants which contain metal fuel such as Magnesium-Aluminum powders or combines of Magnesium-Aluminum powders and Boron powders is measured with Crawford bomb and the pressure conditions of ignition experiment are atmosphere and pressurized separately.
为研究镁铝富燃料固体推进剂组分对点火性能的影响,采用改进的靶线法燃速测试系统对多种含镁铝富燃料固体推进剂在常压和加压下进行了通电金属丝点火性能的对比实验。
4) ignition characteristics
点火特性
1.
Effect of primary air velocity and pulverized coal concentration on the ignition characteristics of the first stage chamber for plasma burner;
一次风速度和煤粉质量浓度对等离子燃烧器一级燃烧筒点火特性的影响
2.
And the factors including air flowrate, atomizing air pressure, oil flowrate, viscosity of oil, and temperature in the furnace, which influence the ignition characteristics of an air swirl atomizing spray nozzle were discussed.
进行了点火试验研究,探讨了助燃风量、雾化气压力、喷油量、燃油粘度及炉膛温度等因素对气动旋流喷嘴点火特性的影响。
3.
Many tests have been done to determine the ignition characteristics of minute solid rocket motor.
设计了一种适用于某微小型固体火箭发动机的点火器 ,对某微小型固体火箭发动机的点火特性进行了大量试验研究 ,引入了初始点火压强的概念 ,找出了影响点火延迟时间散布的主要规律 ,确定了能满足微小型固体火箭发动机点火性能的点火方
5) ignition characteristic
点火特性
1.
Using the available data from 3 starts in simulated altitude tests,the windmilling start ignition characteristic of a turbofan engine was analyzed in this paper.
发动机点火特性是其在极限高度与极限边界成功起动的重要影响因素。
6) ignition function
点火性能
1.
Analyses method of testing and trouble diagnosing about gasoline engine s ignition function in four aspects.
从四个方面阐述了汽油机点火性能检测与故障诊断的方法。
2.
The influence law of the ignition function of base bleed unit on thedispersing of drag coefficient along the whole trojectary has been calculated andanalysed.
该文利用外弹道学的层权理论,分析计算了底部排气弹底排装置的点火必能对阻力系数沿全弹道分布的影响规律,指出点火性能对底部排气弹射程及密集度的影响主要体现在底排工作段上。
补充资料：非水硬性胶凝材料
分子式：
分子量：
CAS号：
性质：不能在水中硬化但能在空气中或其他条件下硬化的胶凝材料。种类很多，既有无机的也有有机的。一般用途的有石灰、石膏等。特殊用途的有耐酸胶结料、磷酸盐胶结料及环氧树脂胶结料等。
分子量：
CAS号：
性质：不能在水中硬化但能在空气中或其他条件下硬化的胶凝材料。种类很多，既有无机的也有有机的。一般用途的有石灰、石膏等。特殊用途的有耐酸胶结料、磷酸盐胶结料及环氧树脂胶结料等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条