1) hydraulic pump-motor
液压泵电机
2) hydraulic
液压
1.
Constructional and Technical Features of Hydraulic Nine-roller Hot Plate Leveler in Shaogang;
韶钢全液压九辊热矫直机的结构和技术特点
2.
Improving of the Hydraulic System for Ladle Turntable;
钢包回转台液压系统改造
3.
The leak of the machine tool hydraulic system and solutions of it;
机床液压系统的泄漏与解决办法
3) hydraulic pressure
液压
1.
GK400N mixer hydraulic pressure and lubrication system analysis;
GK400N密炼机液压和润滑系统分析
2.
Y3180H gear-hobbing machine hydraulic pressure principle of work and fault analysis;
Y3180H型滚齿机液压工作原理和故障分析
3.
Design of round wood non-center peeling machine based on thickness detecting and hydraulic pressure;
基于测厚控制与液压的无卡轴旋切机设计
4) hydraulic system
液压
1.
Study on the Arm Structure and Hydraulic System of Intelligent Bridge_detection Vehicle;
智能桥梁检测车臂架结构及液压系统的研究
2.
The design means of the hydraulic system and the circuitry were introduced .
文章给出了旋转升降舞台总体设计思路,详细介绍了液压系统、电气控制系统设计方案,以及该液压系统的一例典型故障的诊断与维修过程。
3.
This paper analyzes the working processes of hydraulic and mechanical driving systems in caterpillar combines and focuses on the configuration method of the hydraulic driving system, the selection of the hydraulic components, the specification of the hydraulic system, the calculation and testing of the performance of the hydraulic system in some combines.
液压行走系统因其结构简单、操纵方便、转向灵活等特点已广泛在联合收割机中采用。
5) hydraulic transmission
液压
1.
Method In ordinary traction beds designed by mechanical－ electrical－ microprocessor controlling method,this paper put a new method useing hydraulic transmission.
方法应用液压传动技术、采用计算机专家系统控制的方法。
6) hydraulics
液压
1.
The CAT Improvement on CSP Line Hydraulics Testing Stand;
CSP生产线液压实验台CAT改进
2.
To design electromotor seat which can be moved by x-axis or y- a xis for dragging the five ton s electromotor and eliminating anti-influence ca used by dragon crane, the paper studied on this subject and made designing wor k for achieving the goal which could realize automation through the close combin ation of machinery and hydraulics and electronics.
为此,进行了这方面的方案研究,并进行了设计开发,通过机械、液压、电气三个方面的紧密结合,能够实现自动控制。
3.
This paper presents an intelligent coiling machine with advanced skills of machine,electric,hydraulics,electron and computer designed for manufacting motor windings with thick flat wires.
针对扁平线以宽边为绕制方向绕制电机线圈的要求,提出了一种集机械、电气、液压、电子、计算机等先进技术于一体的智能绕线机。
参考词条
补充资料：传动：液压泵
为液压传动提供加压液体的一种液压元件﹐是泵的一种。它的功能是把动力机(如电动机和内燃机等)的机械能转换成液体的压力能。输出流量可以根据需要来调节的称为变量泵﹐流量不能调节的称为定量泵。液压系统中常用的泵有齿轮泵﹑叶片泵和柱塞泵 3种。齿轮泵﹕体积较小﹐结构较简单﹐对油的清洁度要求不严﹐价格较便宜﹔但泵轴受不平衡力﹐磨损严重﹐泄漏较大。叶片泵﹕分为双作用叶片泵和单作用叶片泵。这种泵流量均匀﹐运转平稳﹐噪音小﹐工作压力和容积效率比齿轮泵高﹐结构比齿轮泵复杂。柱塞泵﹕容积效率高﹐泄漏小﹐可在高压下工作﹐大多用於大功率液压系统﹔但结构复杂﹐材料和加工精度要求高﹐价格贵﹐对油的清洁度要求高。一般在齿轮泵和叶片泵不能满足要求时才用柱塞泵。还有一些其他形式的液压泵﹐如螺杆泵等﹐但应用不如上述3种普遍。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。