1)  air brick
微孔砖
2)  light-weight porous brick
轻质微孔砖
1.
Study on preparation of light-weight porous brick with high content of urban sewage sludge;
高含量城市污泥制备轻质微孔砖的研究
3)  Microporous
微孔
1.
Synthesis of n-butyl acrylate with microporous silica-supported polyoxometalate H_3PW_(12)O_(40)/SiO_2 as catalyst;
微孔多金属氧酸H_3PW_(12)O_(40)/SiO_2催化合成丙烯酸正丁酯
2.
Synthesize and characterization of microporous hydroxyapatite crystal by hydrothermal method;
微孔纳米羟基磷灰石的水热合成与结构表征
3.
Properties including water absorption rate,oil absorption rate and the structure of microporous starch detected by X-ray diffraction and SEM(Scanning Electronic Microscope)were also studied.
以红薯淀粉为原料,探讨α-淀粉酶用量、反应温度、反应pH值和反应时间等因素对其微孔化反应的影响,并对微孔淀粉的吸水率、吸油率和X射线衍射以及扫描电子显微镜结构表征进行了研究。
4)  micropore
微孔
1.
Effect of micropore on hydrogen adsorption of single walled carbon nanotubes;
微孔对单壁纳米碳管储氢性能的影响
2.
Studies on Diffusion Behavior of Simple Fluid in Micropores by Molecular Dynamics Simulation;
微孔中简单流体扩散行为的分子动力学模拟研究
3.
Effect of Scanning Speed of Frequency-Tripled Nd:YAG Laser on Aperture Size of Micropores in Porcine Acellular Dermal Matrix;
三倍频Nd:YAG激光器不同扫描速度对猪脱细胞真皮基质微孔孔径的影响
5)  Microporosity
微孔
1.
Microporosity Measurement on the Surface of Gold Plated Contacts;
镀金触点表面的微孔率测试
2.
The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.
铸造镁合金微孔的组织形态形成机理符合气体形成模型和溶质再分配理论,从而验证氢气析出形成显微气孔机理。
3.
This paper has investigated the morphologies of the structure and formation mechanism of cast magnesium alloy with the software for analysis percentage of microporosity and field scanning electron microscopy.
铸造镁合金微孔形成机理从热力学角度分析符合气体形成模型;从动力学角度分析符合溶质再分配理论,从而验证氢气析出形成显微气孔机理。
6)  microhole
微孔
1.
The Research about Using the Method of Exposing Air by Microholes by Treating the Coking Water;
微孔曝气在焦化污水处理中的应用研究
2.
Numerical control positioning system for machining spinneret microhole based on image technique;
基于图像技术数控定位加工喷丝头微孔
3.
It reveals that insame condition of alkali treatment, hydroscopic property、 conductivity moisture、moistur permeability and permeability of BPL were better thanPL , the key lay in quantity、size and distribution of microhole.
结果表明 ,在相同碱处理条件下 ,共混涤纶仿麻织物的吸湿性、导湿性、透湿性和透气性均比涤纶仿麻织物好 ,关键在于纤维中微孔的量、尺寸和分布。
参考词条
补充资料：为特型耐火砖和特异型砖
分子式：
CAS号：

性质：又称为特型耐火砖和特异型砖。是一类外形特别复杂的耐火砖。中国标准规定，对于黏土质、高铝质特异型耐火砖，其外形尺寸的比例(最小与最大尺寸之比)在1:8范围以内；厚度尺寸为35～135mm，或管状砖的长度尺寸不大于300mm；具有不多于4个凹角(包括圆弧状凹角在内)，或具有1个30°～50°的锐角，或带有不多于8个沟槽，或有不多于1个孔眼。黏土质耐火砖重1.5～30kg；高铝质耐火砖重1.5～35kg。硅质特异型耐火砖，其外形尺寸的比例在1:6范围以内，厚度尺寸为35～135mm，或管状砖的长度尺寸不大于300mm；具有不多于4个凹角(包括圆弧状凹角在内)，或具有30°～50°的锐角，或带有4个沟槽，或带有不多于1个孔眼，重1.5～25kg。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。