1) convex cam
凸面凸轮
2) convex globoidal cam
凸弧面凸轮
3) globoidal cams
弧面凸轮
1.
Aiming at the characteristic of globoidal cams' surface,based on the profile equation of globoidal cams and two types of machining technics with both generating method and resembling freeform surface method,a multi-axis NC programming system for globoidal cams has been developed by using languages including VC++,UG/API and Menuscript.
针对弧面凸轮的廓面特点,基于弧面凸轮廓面方程以及范成法和仿自由曲面法两种加工工艺,系统研究了弧面凸轮的多轴数控加工编程技术,包括弧面凸轮的实体造型、刀轨生成、加工过程实体仿真和数控程序串口通讯,特别是深入分析了两种数控工艺产生的编程误差。
2.
An adaptive NC programming algorithm of globoidal cams is proposed in this paper based on the constancy of feed rate and the control of chord error.
提出了一种基于进给速度恒定和控制弓高误差的弧面凸轮自适应数控编程算法。
4) edge cam
端面凸轮
1.
NC machining of edge cam based on Proe2001 and Cincinnati VMC-1000;
基于Proe2001和辛辛那提马刀1000的端面凸轮NC加工
5) planar cam
平面凸轮
1.
NC machining of planar cam based on proe2001 and cincinnati VMC-1000;
基于proe2001和辛辛那提马刀1000的平面凸轮NC加工
2.
NC Machining of Planar Cam Based on UG;
基于UG的平面凸轮NC加工
3.
The application of substitute equivalent linkage instead of higher pair in kinematic analysis of a planar cam mechanism with a roller translating follower;
高副低代在滚子直动从动件平面凸轮机构运动分析中的应用
6) Plate Cam
平面凸轮
1.
Study on Method of Data Processing in Measurement of Plate Cam Borderline;
平面凸轮轮廓线检测数据处理方法研究
2.
The measurement of plate cam contour line on the numerical control grinding machine is introduced in this paper.
介绍了在数控凸轮磨床工作台上对平面凸轮轮廓线进行检测的方法,主要包括检测原理,系统硬件构 成,以及系统软件的数据采集与数据处理等方法。
补充资料：凸面镜
1.亦称"凸镜"。 2.中厚边薄的透光镜，为球面镜的一种，反射面凸出，曲率中心在镜后，焦点在曲率中心与镜心连线的中点上。可引火，并可制显微镜及老花眼镜。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条