1.
Digital design of cylindrical end cam based on curve fitting and correction
基于曲线拟合修正的圆柱端面凸轮数字化设计
2.
THE APPLICATION AND DESIGN OF THE CAM INDEX DRIVE IN A CAP SCREWER
旋盖机端面蜗形凸轮机构的应用与设计
3.
STUDY ON PROFILE MODIFICATION OF ROLLER GEAR CAM MECHANISMS
弧面分度凸轮机构凸轮廓线修形研究
4.
Ferguson Cam Mechanism and the Design of Cam Surface
福开森凸轮机构及其凸轮轮廓曲面的设计
5.
tyre having a lump or bulge
轮胎面起硬块或凸起
6.
The Method of Checking Cylindrical Indexing Cam Contour with Cam Check Meter
用凸轮检测仪检测圆柱分度凸轮廓面的方法
7.
locking cam keeper of container end frame
集装箱端架锁凸轮杆插座
8.
Turn the top feed cam until it reaches the position to allow the three components such as the throat plate surface, top end of needle eyelet and presser foot (pressing plane) to align, and fix the cam at that position.
在针板上面、针孔上端、中压脚(压脚面)的3点对齐的位置，转动上送布凸轮，然后固定。
9.
Flat belt drive pulleys-crowns
GB/T11360-1989平带传动带轮轮缘凸面
10.
A study of cam profile equations and engagement features for cam mechanisms with planar envelope and globoidal indexing
平面包络弧面分度凸轮机构凸轮廓面方程与啮合特性的研究
11.
Fundamental Equation for Cam Mechanisms-from Planar to Spherical
凸轮机构的基本方程:从平面到球面
12.
The Profile Determination of Conical Cam with a Translating Follower Based on the Theory of Envelopes
应用包络面理论建立直动从动件圆锥凸轮机构凸轮廓面方程
13.
Research on the Automatic Equipment for the Jointing of the Knurling Assembled Camshaft End Socket;
滚花装配式凸轮轴端头连接自动化装备研究
14.
Pinholes are the defects often found in cam surface layer after re-melted and chilled.
凸轮面针孔是凸轮轴重熔淬火工艺容易产生的质量问题。
15.
The camshaft also fits inside the block, except on overhead-cam engines( OHC).
除了顶置凸轮(HC)动机以外，凸轮轴都安装在气缸体里面。
16.
Basic Principles of Non-Equivalent Machining of Spatial Cam Surfaces
空间凸轮廓面非等价加工的基本原理
17.
THREE DIMENSION FINITE ELEMENT ANALYSIS OF ROLLER GEAR INDEXING CAM MECHANISM
弧面分度凸轮机构的三维有限元分析
18.
Research of the dynamic features of globoidal indexing cam mechanisms
弧面分度凸轮机构动力学特性的研究