1) breadboard model
试验板模型
2) model test
模型试验
1.
Hydraulic design and model test of a diffuser for wastewater discharge;
污水排海工程的扩散器水力设计与模型试验研究
2.
Model test for the water-soaked mass prediction ahead of tunnel face by geothermal measurement;
岩体温度法隧道施工掌子面前方含水体预报模型试验研究
3.
Method and equipment of model test for scouring resistance of riverbank with grass cover;
植被护坡抗冲模型试验方法与装置研究
3) model experiment
模型试验
1.
Influence of water density on similarity in wave model experiments;
波浪模型试验中水密度对相似性的影响
2.
Study on a model experiment of two ships anchoring;
码头双船系泊模型试验研究
3.
Similarity Relation of Model Experiment about Thermal Environment of Tunnel Inside;
隧道内热环境模型试验的相似关系
4) model tests
模型试验
1.
Development of multifunctional apparatus for model tests of foundations for overhead transmission line engineering;
输电线路工程地基基础多功能模型试验系统研制
2.
Introduction on Application of Similarity and Model Tests for Mechanical Design;
浅谈相似理论与模型试验在机械设计中的应用
3.
Research on the Similitude Theory of Dynamic Model Tests Based on Numerical Simulation;
基于数值模拟的结构动力模型试验相似理论研究
5) modeling test
模型试验
1.
To solve the problems of harmful intake flow patterns affecting the pumping system characteristics and safe operation of pumping station,the author improved the intake flow patterns by adopting the method of modeling test with a 1∶50 model of Jingdu pumping station including the east sluice,west sluice and the diversion canals of 4 pumping stations.
针对泵站进水流态不良,影响水泵装置性能的发挥及泵站的安全运行等问题,采用模型试验研究进水流态,建立模型比为1∶50的江都东闸至西闸间的整体进水河段及4座泵站引河的整体模型,改善了不良流态。
2.
According to the modeling tests,the method to determine rel.
利用地质力学模型试验方法,对上述两个问题进行了探讨,给出了确定开挖松弛区范围的方法,以及顺层岩质边坡的边坡走向与岩层走向夹角的上限值。
3.
The artifical rainfall modeling test in lab and stability analysis of slope are made on the effect of erosion on slope of municipal solid waste in the situation with and without vegetation.
利用室内模型试验手段,研究了在3种降雨强度作用下城市固体废弃物路堑边坡在无植被防护与有植被防护条件下坡面冲刷的变化规律,并应用侵蚀模数的概念来评价坡面的抗侵蚀能力。
6) experiment model
试验模型
1.
The article introduces the design of level bearing performance experiment model for cable pylon anchorage zone of Yellow River No.
该文介绍了济南黄河三桥索塔锚固区水平受力性能试验模型的设计;通过有限元分析,对试验模型和实际结构的受力进行了比较。
2.
To make the analysis result of finite element model have good correlation with the corresponding measured result and ensure that the calculated result can effectively predict measurement result to guide practical construction,a contrast analysis between measured results of experiment model and calculation results of finite element model of a suspendome was carried out.
为了使有限元计算模型给出的分析结果与相应的实测结果有良好的相关性,确保计算结果能切实有效地预测结构实测结果,并指导实际结构建造的顺利进行,对一弦支穹顶结构的试验模型实测结果与有限元模型计算结果进行对比分析,发现了理论模型与实际结构之间的差异,识别出导致差异的主要原因,并提出了基于测试结果对计算模型进行修正的算法与理论。
补充资料：精馏塔加料板数学模型
分子式：
CAS号：
性质：加料板是精馏塔中一块特殊位置的塔板，对精馏塔的加料板建立数学模型就是以加料板为系统，采用物料平衡和能量平衡的方法描述其输入输出关系的数学模型。
CAS号：
性质：加料板是精馏塔中一块特殊位置的塔板，对精馏塔的加料板建立数学模型就是以加料板为系统，采用物料平衡和能量平衡的方法描述其输入输出关系的数学模型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条