1) lubricant carrier
润滑剂载体
2) Lubrication carrier
润滑载体
3) solid lubricant
固体润滑剂
1.
Mechanical properties and microstructure of Al_2O_3/TiC ceramics with the addition of solid lubricants;
添加固体润滑剂的Al_2O_3/TiC陶瓷材料力学性能和显微结构
2.
A solid lubricant OCL-RH for drilling fluid.;
钻井液用固体润滑剂OCL-RH的研制
3.
A kind of new anti-friction abrasion resistant coating is prepared with methyl methacrylate homopolymer as binder, MoS2 as solid lubricant, butadiene acrylonitrile rubber (BNR)/ acrylonitrile-butadiene-styrene (ABS) resin as flexibilizer, and other additives.
采用甲基丙烯酸甲酯均聚物为成膜物,以二硫化钼(MoS2)、丁腈橡胶/ABS树脂为固体润滑剂和增韧弹性体,加入其他助剂,获得一种新型的减阻耐磨涂料,并对其磨损机理进行了初步的探讨。
4) solid lubricants
固体润滑剂
1.
Self lubricating conducting composites with controllable phase transformation were prepared, which were added solid lubricants such as PTFE, graphite and Ekonal to the conductive matrix of LDPE/CB(carbon black).
研制了相变可控的复合导电和自润滑材料 ,它是以低密度聚乙烯 -炭黑为导电基材 ,加入固体润滑剂聚四氟乙烯、石墨和 Ekonal(聚苯酯的商品名 )构成。
2.
A novel high temperature composite based on Poly (phthalazinone ether sulfone ketone) (PPESK) adding solid lubricants and shot pitch-based carbon fibers are prepared in this paper.
以含二氮杂萘酮结构的聚醚砜酮（ＰＰＥＳＫ）树脂为基体，填加固体润滑剂和短炭纤维（ＣＦ）制备了新型耐热树脂基复合材料、研究了摩擦条件（如载荷、行程等）和ＣＦ含量对复合材料的摩擦磨损性能的影响，分析了ＰＰＥＳＫ树脂及其复合材料的磨损机理。
3.
The self lubricating mechanism of the composites was analyzed with emphasis on the effect of the solid lubricants.
采用粉末冶金自由烧结工艺制备出锡青铜基自润滑复合材料 ,对该类复合材料的力学性能与摩擦磨损特性进行了研究 ,从固体润滑剂角度就其室温与 45 0℃自润滑机理进行了分析与探讨 。
5) liquid lubricants
液体润滑剂
1.
The development of liquid lubricants for current and projected high-performance aircraft engine was reviewed.
评述了现正使用和预期在未来先进飞机发动机上可能使用的液体润滑剂。
2.
The lubrication theory of liquid lubricants for space applications was summarized.
概述了航天器用液体润滑剂润滑理论,对模拟航天器机械部件工作条件建立的液体润滑剂润滑性能评定方法及其评定结果进行了介绍。
6) gaseous lubricant
气体润滑剂
补充资料：润滑涂层(见润滑载体)
润滑涂层(见润滑载体)
lubrication coat
runhua tueeng润滑涂层(lubrieation coat)见润滑载体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条