1)  flexible,tenacious,viscons,
韧性的
2)  persistent struggle
韧性的战斗
3)  strong vitality
韧性的生命力
4)  toughness
韧性
1.
Thermal simulating the microstructure in weld heat affected zone of calcium microalloyed C-Mn steel and its effect on toughness;
热模拟微钙C-Mn钢焊接热影响区的组织及其对韧性的影响
2.
Effect of EAF-VOD-VAR and VIM-VAR Metallurgical Process on Toughness of Ultra-high Strength Steel G50;
EAF-VOD-VAR和VIM-VAR冶炼工艺对G50超高强度钢韧性的影响
3.
Effect of granular bainite in microstructure after welding on impact toughness for micro-calcium steel;
微钙钢焊后显微组织中的粒状贝氏体对韧性的影响
5)  flexibility
韧性
1.
Melamine formaldehyde resin is a thermosetting polymer,spinnability and flexibility of fiber are poor.
三聚氰胺甲醛树脂是热固性高聚物,成纤性差,成纤纤维韧性差;通过苯代三聚氰胺、聚乙烯醇(PVA)对三聚氰胺树脂进行改性,提高了树脂溶液的可纺性,所制纤维的柔韧性得到了提高。
2.
The results of the experiments show that the grain size of the carbon strips reduces with the decreasing of the thickness;the general mechanical properties and formability of the carbon strips are preferable;the flexibility of 5.
75mm厚SS40 0钢板的系列温度冲击实验发现,该钢板在-60℃时仍具有较好的韧性。
6)  tenacity
韧性
1.
Study on The Quantitative Relationship Between The Forms of Carbides and The Tenacity of Abrasion Resisting High Chromium Cast Irons;
碳化物形态与高铬耐磨铸铁韧性间定量关系的研究
2.
Various performance test results showed that the product possessed good toughness and tenacity,excellent thermal stability during storing and good road performance at high-low temperatures.
通过性质分析,产品的粘韧性和韧性优良,储存热稳定性强;SHRP试验及混合料检测结果表明,产品满足PG64-28的指标要求,具有良好的路用性能。
3.
The steel wire was broken heavily and the tenacity of steel wire was worse with the general drawing process when manufacturing steel wire of high quality,qualified products proportion is low.
在生产高性能钢丝时,采用常规拉拔工艺时断丝严重,产品韧性较差,从而严重地制约着产品的合格率。
参考词条
补充资料：超韧性聚甲醛
分子式：
CAS号：

性质：又称超韧性聚甲醛。多采用机械共混法制备。一般需要在高剪切力的双螺杆挤出机或密炼机中进行。它具有如下特性：(1)韧性高，改共混物的缺口冲击强度为聚甲醛(POM)的7倍，无缺口冲击强度为POM的30倍，而且比PC高10倍；(2)吸湿性小，从而保证了制品的尺寸稳定性；(3)耐溶剂性、耐应力开裂性优于PC。以100ST为例，密度1.34g/cm3，拉伸强度46MPa，断裂伸长率200％，弯曲模量1.41GPa，热变形温度(1.86MPa负荷)90℃，悬臂梁缺口冲击强度940J/m。适于制造汽车、农业机械、电器、机械、建筑、运输和精密仪器的零部件等。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。