1)  proportioning valve
配合阀
2)  fit
配合
1.
Fit Capability and Fit Capability Idices;
配合能力分析和配合能力指数
2.
With database and software technique,the computeraided enquiring tolerance and fit information is implemented.
运用数据库和软件技术实现了公差和配合信息的计算机辅助查询,提高了产品设计和编制工艺文件的工作效率。
3.
Assembling stress may bring about changes of other fitting function in assembling procedure.
提出了在装配过程中由于过盈配合所产生的装配件变形可能导致其他配合性质改变的问题;以弹性力学和材料力学的原理为依据,对装配变形量进行准确的分析计算,为合理确定公差与配合、保证工作精度和提高设计成功率奠定了理论基础。
3)  coordination
配合
1.
Study of the relay-coordination between the generator-transformer unit and the power grid system;
并网大机组保护与系统配合问题的探讨
2.
The Analysis of Coordination between Computerized Protection and Fuse in 6kV F-C Loops;
6kVF-C回路微机保护与熔断器保护的配合分析
3.
On selection and protection coordination of HV & LV switches in 10 kV switchhouses;
10kV配电房高低压开关的选择与保护配合
4)  complexation
配合
1.
Synthesis and Amino Acids Complexation Properties of Thiacalix[4]-1,3-2,4-aza-bis-crowns;
硫杂杯[4]-1,3-2,4-氮杂双冠醚的合成与氨基酸配合性能
2.
Study on host-guest complexation of-cyclodextrin with Azo Benzene by phase dissoling method;
相溶解法研究β-环糊精和偶氮苯的主-客体配合作用
3.
The complexation behaviors of compounds 7a~7c for sodium ion were studied by(()~1HNMR).
用1HNMR、MSI、R和EA表征了其结构,并用循环伏安法研究了它们的电化学性质,用1HNMR初步评价了衍生物对钠离子的配合性能。
5)  Cooperation
配合
1.
8 cases of donor liver perfusion cooperation and hgypothermal preservation received orthotopic liver ransplantation;
8例肝移植供肝灌注及低温保存配合
2.
Cooperation of nuraing during lapqroscopic high ligation of hernial sac in children;
小儿微型腹腔镜疝囊高位结扎术的手术配合
3.
Cooperation and nursing in the placement of intestinal feeding tube with gastroscope;
胃镜引导下放置空肠营养管的配合及护理体会
6)  match
配合
1.
Field loss protection of generator has to operate after field regulator low excitation limit, to prevent maloperation of field loss protection the setting match between field loss and low excitation limit should conform with this requirement that related protocol states.
发电机的失磁保护必须在励磁调节器的低励限制之后动作,为防止失磁保护误动作,相关规程均明确要求失磁保护和低励限制的整定必须满足此配合条件。
2.
This paper puts forwa rd actual problem,which the power for di esel main engine cant be controlled and adjusted in our marine automatic engine room laboratory,and analyses matching w ork condition for marine diesel engine a nd hydraulic power detector,and deeply d is cusses existing problems for inlet or ou tl et water system and control means.
提出我校轮机自动化机舱实验室柴油主机功率无法调控的实际问题 ,分析柴油机与水力测功器的配合情况 ,深入探讨水力测功器供排水系统及控制方法存在的问题 。
3.
It not only from the last match performer in harmony,rhythm,but also announced to public the contents of the work specially.
阐述了钢琴伴奏不仅从和声上、节奏上配合表演者,还特别揭示了作品的内容。
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀
减压阀
顺序阀
控制油路的特点
通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0
通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定
直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力
出油口情况
出油口与油箱相连
出油口与减压回路相连
出油口与工作回路相连
泄漏形式
内泄式
外泄式
内泄式
进油口状态及压力值
常态
常闭(原始状态)
常开(原始状态)
常闭(原始状态)
工作状态
进出油口相通,进油口压力为调整压力
进油口压力低于出油口压力,出油口压力稳定在调定值上
进出油口相通,进油口压力允许继续升高
联接方式
并联
串联
实现顺序动作式串联作卸荷阀用时并联
功用
定压、溢流或安全作用限压、稳压、保压
减压、稳压
不控制系统的压力,只利用系统的压力变化控制油路的通断
进油腔压力p1控制阀芯移动
出油腔压力p2控制阀芯移动
进油腔压力p1控制阀芯移动
说明:补充资料仅用于学习参考,请勿用于其它任何用途。