1) resistance to swelling,swelling resistance
耐溶胀性
2) resistant medium
耐溶媒
1.
In this paper,mothe liquor is condensed by SelROTM resistant medium nanofiltration membranes produced by koch company.
采用KOCH公司SelROTM耐溶媒纳滤膜浓缩回收6-APA母液,将浓缩液重结晶,可获得6-氨基青霉烷酸(6-APA),根据检验结果,6-氨基青霉烷酸符合厂订标准,收率可以提高2%～3%,效益十分可观,应用前景十分广阔。
2.
In this paper ,Lincomycn Hydrochloride acetone mothe liquor is condensed to 300000u/ml by SeIROTM resistant medium nanofiltration membranes produced by Hydroeherm company and middle equipment M104 which resistant explosion.
采用Hydrochem公司的SeLROTM耐溶媒纳滤膜及M104防爆型中试设备浓缩盐酸林可霉素丙酮母液至30万U/ml,将浓缩液重结晶,获得盐酸林可霉素成品。
3) solvent resistance
耐溶剂性
1.
Study on Dielectric Properties and Solvent Resistance of PPE/ EP System;
PPE/EP体系的介电性能和耐溶剂性研究
2.
Effect of polyorganosiloxane on solvent resistance of NR surface;
聚硅氧烷对天然橡胶表面耐溶剂性的影响
3.
The solvent resistance of modified NR was studied and the microstructure was investigated by using scanning electron microscope.
研究了改性后胶膜的耐溶剂性能,通过扫描电镜研究了天然橡胶表面改性后的表面结构。
4) solvent-resistance
耐溶剂
1.
As a result, the cohesiveness and the ability of the solvent-resistance of the adhesive were improved.
在配好的胶粘剂溶液中,加入RC,通过多异氰酸酯和天然橡胶的羟基以及增粘树脂的羧基进行交联,使胶粘剂的内聚能提高,耐溶剂性增强。
2.
The factors affecting oil,solvent-resistance and compression-set of low-hardness PU elastomers were studied as follows:different polyol,the free content of NCO group in prepolymer, coefficient of chain-extending,different using amount of plastizer.
用聚酯二醇 (或聚四氢呋喃二醇 )、甲苯二异氰酸酯、三元醇等原料合成低硬度浇注型聚氨酯弹性体 ,考察了多元醇的种类、游离NCO质量分数、交联剂的并用和交联系数、增塑剂的用量等因素对综合力学性能和耐油性、耐溶剂性能和压缩变形性的影响。
3.
It was proved that adhesive possesses excellent solvent-resistance by comparative test.
介绍了以特殊聚酯多元醇、低分子二元醇、低分子三元醇或四元醇、二胺及二异氰酸酯为主要原料,制备二榔皮移膜革用高固含量耐溶剂性双组分聚氨酯胶黏剂的方法及过程,并对比验证了其优良的耐溶剂性。
5) solvent resistance
耐溶剂
1.
Study on Solvent Resistance and Crystallization Behavior of PCA/PA6;
PC/PA6共混体系的耐溶剂性及其结晶行为的研究
2.
Polyurethane elastomers with low hardness and solvent resistance were prepared by reacting MDI-50,TDI-65 and TDI- 80 with polyester polyol respectively.
分别采用MDI-50、TDI-65和TDI-80与聚酯多元醇反应制得低硬度耐溶剂聚氨酯弹性体制品。
3.
The results showed that mechanical properties of ABS composites changed with the increasing of the impregnation time,ABS/PBT composites had good solvent resistance than ABS/PA6 composites.
结果表明:随浸泡时间的延长,ABS复合材料力学性能有明显变化;与ABS/PA6复合材料相比,ABS/PBT复合材料具有更优异的耐溶剂性能。
6) solvent-resistance
耐溶剂性能
1.
The mechanical properties,wearing properties and solvent-resistance were also investigated.
采用溶液插层法和双辊混炼法制得了BR/NR/OMMT纳米复合材料,进行了透射电镜分析,研究了复合材料的力学性能、磨耗性能以及耐溶剂性能。
2.
The mechanical properties and solvent-resistance properties were studied.
研究了复合材料的力学性能和耐溶剂性能。
参考词条
补充资料：抗溶胀性
分子式：
CAS号：
性质：固体浸渍于液体或暴露于蒸气中尺寸不变化的能力。当固体高聚物浸渍于溶剂，溶剂分子会渗入高聚物内部。随后，线型高聚物分子会均匀分散在溶剂中，逐渐形成完全溶解的分子分散的均相体系。对于交联的高聚物，因有交联的化学键束缚，不能再进一步使交联的分子拆散。交联度大的高聚物溶胀度小，交联度小的高聚物溶胀度大。也可以用物理的方法，比如在木材表面涂漆来阻止水分的进入材质，从而也就提高了这一构件的抗溶胀性。
CAS号：
性质：固体浸渍于液体或暴露于蒸气中尺寸不变化的能力。当固体高聚物浸渍于溶剂，溶剂分子会渗入高聚物内部。随后，线型高聚物分子会均匀分散在溶剂中，逐渐形成完全溶解的分子分散的均相体系。对于交联的高聚物，因有交联的化学键束缚，不能再进一步使交联的分子拆散。交联度大的高聚物溶胀度小，交联度小的高聚物溶胀度大。也可以用物理的方法，比如在木材表面涂漆来阻止水分的进入材质，从而也就提高了这一构件的抗溶胀性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。