1)  solvent resistance
耐水性和耐溶剂性
2)  water resistance
耐水
1.
Discussion on water resistance mechanism of casein adhesive for labeling;
浅谈耐水金属箔标签胶的耐水机理
2.
Preparation of adhesive cured at room-temperature with high-temperature and water resistance;
室温固化耐高温耐水胶粘剂的研制
3.
Slag powder and water glass with proper additives and loading materials were used to prepare coating which was brushed into two layers′ and the surface drying time,water resistance,alkali resistance and bond strength were tested.
采用矿粉和水玻璃为基料,掺加适量助剂和填料,用两层涂刷的方法制备涂料,并测试了涂料表面干燥时间、耐水性、耐碱性和黏结强度。
3)  water-resistance
耐水
1.
Study on environmental friendly and water-resistance adhesive for wood;
环保耐水型木材用胶粘剂的研究
2.
The coal seam has the advantage of water-resistance.
该抑尘剂以水溶性高分子和淀粉为原料经接枝改性、催化氧化制成,具有原料来源广、成本低等特点,煤层干燥后耐水性能良好。
4)  waterproof
耐水
1.
The internal wall coating has been success-fully developed with practical application value,which is based on PVA with environmental protection,waterproof and good anti-fouling.
成功开发出具有实际应用价值的,以PVA为基料,环保、耐水,并具有良好防污性的内墙涂料。
2.
This paper discussed the performance of adhesive used in tung plate alignment such as color development,waterproof and cold resistant.
主要探讨了如何解决用于桐木拼板中的胶粘剂的显色、耐水、耐低温的问
3.
Reaction mechanism of waterproof agent HA321and oil-proof agent F-321with the sodium sulfite pulp is studied.
着重探讨了防水防油剂用量、添加方式及助留剂等对纸浆模塑制品耐水耐油性能的影响,得出的最佳工艺条件为:防水剂用量4%,防油剂用量0。
5)  water-proof
耐水
1.
The experiment shows that the modified resin could improve its water-proof property and cohesive-ness , which is applied for the paper and adhesive of water-proof in coating abrasive
采用环氧树脂改性醇酸树脂,用于涂附磨具的纸基耐水处理剂和耐水砂纸的粘结剂,通过配方优选制得合成工艺和树脂综合性能优良的改性树脂,实验表明树脂具有优良的耐水性、耐溶剂性和粘结性。
6)  water resistance
耐水性
1.
Influence of gypsum on water resistance of phosphoaluminate cement;
石膏对磷铝酸盐水泥耐水性的影响
2.
Study on water resistance of waterproofing coating;
防水涂料耐水性能的研究
3.
Hardening and water resistance of thermoplastic polyurethane elastomer;
热塑性聚氨酯弹性体的增硬与耐水性
参考词条
补充资料：耐溶剂橡胶
分子式：
CAS号：

性质：指抗耐有机溶剂、燃料油、矿物油等溶胀有硫化胶。橡胶抗溶剂溶胀的能力取决于橡胶的分子结构与交联密度。橡胶分子中若含有氰基、羟基、氯、氟原子等极性官能团会使橡胶具有一定的极性，与非极性的石油类很难溶胀。故丁腈橡胶、氯丁橡胶、丙烯酸酯橡胶、聚硫橡胶等，对石油系油类均有良好的耐溶胀性。对于芳烃溶剂抗溶胀最好的是氟橡胶和交联聚乙烯醇。选择可提高交联密度的硫化体系、适当增加硫黄用量以及提高填充剂用量有助于橡胶的耐溶胀性。牛皮胶对提高天然橡胶的耐油性有显著效果。软化剂选用低分子聚合物类及油膏等不易被油类抽出者为佳。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。