1) roller swelling
墨辊膨胀
2) expanded graphite
膨胀石墨
1.
Preparation and conductive behavior of expanded graphite/poly-(ethylene terephthalate) conductive composites;
膨胀石墨/聚酯导电复合材料的制备与导电行为
2.
Application of expanded graphite in treatment of environmental pollution;
膨胀石墨在环境污染治理中的应用
3.
Adsorption and decoloration of acid dyes waste water with expanded graphite;
膨胀石墨对酸性染料废水的吸附脱色作用
3) expandable graphite
膨胀石墨
1.
Structure and Flame Retardance of Expandable Graphite Filled PP;
可膨胀石墨阻燃聚丙烯的结构与阻燃性能
2.
In this research,the KH-550 or NXT-105 modified expandable graphite,carbon fiber,and acrylonitrile butadiene styrene resin(ABS)were mixed to prepare a composite with better conductivity.
利用硅烷偶联剂和钛酸酯偶联剂对膨胀石墨进行了改性,将不同含量的膨胀石墨及碳纤维与丙烯腈-苯乙烯-丁二烯共聚物复合,制备了具有较好导电和力学性能的复合材料。
3.
Ammonium polyphosphate(APP) and expandable graphite(EG) have been used to improve flame retardancy of poly(ethylene-co-vinyl acetate)(EVA).
对聚磷酸铵(APP)和膨胀石墨(EG)协同阻燃乙烯-醋酸乙烯酯共聚物(EVA)及其阻燃机理进行了研究。
4) exfoliated graphite
膨胀石墨
1.
Chemical preparation of exfoliated graphite and factors affecting its quality;
膨胀石墨的化学制备法和影响其质量的因素
2.
Preparation of TiO_2-coated exfoliated graphite photocatalyst and its adsorption and photodegradation of methyl orange solutions;
膨胀石墨负载纳米TiO_2光催化剂的制备及对甲基橙溶液的吸附与光降解
3.
Preparations, structures and applications of exfoliated graphite;
膨胀石墨的制备、结构和应用
5) Graphite expansion
石墨膨胀
6) Expansible graphite
膨胀石墨
1.
The adoption chemistry oxidizes the method synthesized the expansible graphite,analyzing to put the layer craft parameter to the inflation physical volume with sulphur content influence with deal.
采用化学氧化法合成了可膨胀石墨,分析了插层工艺参数对膨胀容积和残余硫含量的影响,初步探讨了可膨胀石墨的插层机理,确定了低硫膨胀石墨的合理工艺参数。
2.
The article discusses the physical and chemical features of expansible graphite and its parent population---general graphite.
详细论述了膨胀石墨及其母体普通石墨的物理、化学特性 。
3.
A kind of environmentally friendly waterborne tert-fluoro electroconductive coatings with more excellent performances is prepared with graphite, expansible graphite and carbon fiber respectively.
用石墨、膨胀石墨、碳纤维三种不同的炭系填料制备了既环保、又具有比一般涂料更优异的性能的水性叔氟导电涂料。
补充资料：胶印机串墨辊压力调节机构
CN2681895Y
胶印机串墨辊压力调节机构着墨辊轴承座和着墨胶辊摆臂。着墨胶辊摆臂一端套接串墨辊的转轴，其上设有与着墨胶辊轴承座相配合的滑槽，限位压块将着墨胶辊轴承座固设在滑槽中。着墨胶辊轴承座和滑槽之间还设有半圆块，半圆块一端铰接着墨胶辊轴承座，圆弧面抵住滑槽底面，平面抵住设在着墨胶辊轴承座上的控制件。限位压块上设有限位件，用来辅助控制件限制着墨胶辊和串墨辊之间的压力。这种压力调节机构与现有技术相比，由于设有串墨辊压力调节机构，因此可以保证着墨胶辊和串墨辊之间均匀接触，且调节方便，制造成本低。
胶印机串墨辊压力调节机构着墨辊轴承座和着墨胶辊摆臂。着墨胶辊摆臂一端套接串墨辊的转轴，其上设有与着墨胶辊轴承座相配合的滑槽，限位压块将着墨胶辊轴承座固设在滑槽中。着墨胶辊轴承座和滑槽之间还设有半圆块，半圆块一端铰接着墨胶辊轴承座，圆弧面抵住滑槽底面，平面抵住设在着墨胶辊轴承座上的控制件。限位压块上设有限位件，用来辅助控制件限制着墨胶辊和串墨辊之间的压力。这种压力调节机构与现有技术相比，由于设有串墨辊压力调节机构，因此可以保证着墨胶辊和串墨辊之间均匀接触，且调节方便，制造成本低。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条