1) knot breaking strength
接桔强度
2) Joint strength
接头强度
1.
The influences of welding heat input on joint strength were analyzed.
采用钨极氩弧焊的方法对30%SiCP/LD2高体积分数复合材料进行了焊接实验,研究了在同种TIG焊焊接规范参数下LD2-LD2、LD2-30%SiCP/LD2、30%SiCP/LD2-30%SiCP/LD2三种不同材料组合焊接性差异,分析了焊接热输入对接头强度的影响。
2.
The experimental results show that for industrial purity Ti and Ti 6Al 4V, respectively, the overlap brazing joint strength are 418.
结果表明:用Ti-Cu-Ni钎料钎焊TA2和Ti-6Al-4V钛合金的搭接接头强度分别是418。
3.
The temperature and time range of brazing through the wetting experiment were confirmed, and the effect of brazing conditions on the joint strength through the shear experiment was discussed.
通过对钎料润湿性的研究确定钎焊试验的温度和时间范围 ;通过剪切试验研究了钎焊工艺参数对接头强度的影响。
3) bonding strength
连接强度
1.
Effects of holding time on interface structure and bonding strength of brazed joint of hydrogenated TC4 titanium alloy;
保温时间对置氢TC4真空钎焊界面结构及连接强度的影响
2.
Interface structure and bonding strength of brazed joint of TiC cermet/steel;
TiC金属陶瓷/钢钎焊接头的界面结构和连接强度
3.
Through experiments with aluminous sheets,punch bonding mechanism and die designing are studied and main affecting factors on bonding strength characteristics are analyzed.
本文通过对铝板件进行冲压连接实验,研究了这种冲压连接技术的机理和冲压模具设计,并重点分析了影响连接强度特性的主要因素。
4) adhesion strength
粘接强度
1.
Effect of urea modification on adhesion strength and structure of soy protein isolates;
尿素变性对大豆分离蛋白粘接强度和分子结构的影响
2.
The effect of coupling agent b on the adhesion strength of RTV silicone rubber;
偶联剂B对RTV硅橡胶粘接强度的影响
3.
Study on adhesion mechanism between wood and polyurethane adhesive I——Effect of anchoring effect on adhesion strength;
聚氨酯胶粘剂对木材胶接机理研究Ⅰ——机械互锁作用对粘接强度的影响
5) adhesive strength
粘接强度
1.
Study on adhesive strength and water resistance of wood glue based on modified wheat gluten;
改性小麦面筋蛋白作为木材胶粘剂的粘接强度和抗水性研究
2.
Influence of modified soybean protein s secondary structure on adhesive strength;
改性大豆蛋白二级结构变化对其粘接强度的影响
3.
56% of the total mass of the white glue)to copolymerize with vinyl acetate can produce white glue whose apparent viscosity is 13-65 Pa·s,and its adhesive strength and to boiling water-resistant are obviously enhanced compared with the white glue without adding VB in the same preparing conditions.
56%)的VB与醋酸乙烯酯一起共聚,可制得表观粘度为13～65 Pa·s的白乳胶,而且其粘接强度和耐沸水性都比相同条件下制备的不加VB的白乳胶明显提高。
6) bonding strength
胶接强度
1.
Design and fabrication of simple hydraulic testing machine for bonding strength;
简易手动液压胶接强度试验机的设计制作
2.
Bonding strength for larch(Larix gmelinii)on radial and tangential surfaces were studied in this paper.
对落叶松木材水性高分子异氰酸酯 (API)胶粘剂弦径面胶接强度进行了研究。
3.
In order to solve the issue of low bonding strength of the starch-based adhesive after bonding wood materials, the impact of various factors on the adhesive strength in the course of synthesizing adhesive with carboxymethyl starch, polyvinyl alcohol, isocyanate and carboxylic styrene butadiene latex were researched in this paper.
采用二次旋转正交组合方法设计,分析了各合成因素对胶粘剂胶接木质材料后强度的影响规律,优化得到了一种具有较高胶接强度的新型羧甲基淀粉胶粘剂的合成方案。
补充资料：剥离粘接强度
分子式：
CAS号：
性质：在规定的剥离条件下，使胶接试样分离时单位宽度所能承受的载荷，用kN/m表示。
CAS号：
性质：在规定的剥离条件下，使胶接试样分离时单位宽度所能承受的载荷，用kN/m表示。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条