1.
Influences of adherent thickness,temperature and velocity on strength of adhesively-bonded single-lap joints
板厚、温度和速度对单搭接胶接接头强度的影响
2.
Study on Influence of Welding Process Parameters on Strength of Welded Joint
焊接工艺参数对焊接接头强度的影响研究
3.
measuring method for strength of mechanical fastenings for conveyer belts
输送带机械接头强度的测定
4.
Affect of Different Solder on Intension of Cu/W Brazing Joint
不同焊料对Cu/W钎焊接头强度的影响
5.
Ultrasoinc Nondestructive Characterization of Strength and Environmental Degradation of Adhesive Joints;
胶接接头强度及环境退化的超声波无损定征
6.
Influence of Interlayer's Thickness on Strength of HIP Diffusion Bonding Joints Between P/M TC4 Alloy and GCr15 Bearing Steel
中间层厚度对P/M TC4-GCr15扩散焊接头强度的影响
7.
STUDY ON BRAZING PROCESS AND JOINT STRENGTH OF ALUMINAC CERAMICS
氧化铝陶瓷钎焊工艺与接头强度的研究
8.
Analysis of Static Strength for Overlap Joint Plates and Others;
搭接焊接头搭板的静强度分析及其它
9.
The Strength and Loading Capacity of SSAW Pipe Welding Joint
螺旋焊管焊接接头的强度和承载能力
10.
Effect of Recessed Bonding on Stress Distribution and Strength of Adhesively Bonded Joints
间隙连接对胶接接头应力分布和强度的影响
11.
High strength joint bolts and nuts for rails
GB/T5098-1985钢轨用高强度接头螺栓、螺母
12.
Shear strength and fracture surface analysis of BiAgNiCuGe/Cujoint
BiAgNiCuGe/Cu接头抗剪强度与断口分析
13.
Adhesives--Determination of tensile strength of butt joints
GB/T6329-1996胶粘剂对接接头拉伸强度的测定
14.
Study of the Strength and Tightness of Tube-to-Tubesheet Connection Joints;
管子与管板连接接头的强度和密封性能研究
15.
The Deformation Behaviors and the Strength of Welded Joints with Mechanical Properties Mismatch;
力学性能失配焊接接头的强度及变形行为
16.
Research on Fracture Behavior of Ultra-High Strength Steel and Welded Joint
超高强度钢及其焊接接头的断裂行为研究
17.
Numerical Simulation of T-welding Residual Stress and Strength Analysis
T型接头焊接残余应力数值模拟及强度分析
18.
Finite Element Analysis on Lame Wave Evaluating Cohesion Strength In Adhesively-bonded Joint
兰姆波评价胶接接头内聚强度的有限元分析