1) upset welding,upset butt welding，resistance butt welding
电阻对接焊
2) butt resistance welder
电阻对接焊机
3) electric resistance
电阻
1.
Effects of Annealing Temperature on Electric Resistance of Amorphous Cu_(50)Zr_(42)Al_8 Alloy;
退火对Cu_(50)Zr_(42)Al_8非晶合金电阻的影响
2.
Study on the electric resistance changes during dough fermentation for Chinese steamed bread;
馒头面团发酵过程中电阻的变化
4) resistance
电阻
1.
Effect of strain on the electrical resistance of continuous carbon fiber monofilament;
连续碳纤维单丝的应变电阻效应
2.
Nonlinear resistance of carbon fiber reinforced cement based composites;
碳纤维水泥基材料电阻的非线性研究
3.
A study on the resistance minima in an amorphous alloy at low temperature;
非晶合金中的低温电阻率极小行为研究
5) electrical resistance
电阻
1.
The influence of mold pressing parameters on electrical resistance of HDPD/CB composites;
模压条件对聚乙烯/碳黑PTC复合材料电阻特性的影响
2.
The electrical resistances of specimen are measured after the definite number of thermal cycle.
空气介质中在光辐射热疲劳试验机上进行热疲劳试验,在不同热循环周次下测量试样的电阻,并用SEM观察了热循环前后的组织。
3.
The damage of specimen owing to thermal fatigue was evaluated by the relative varieties both of Young`s modulus and electrical resistance,and the phase transformation and microstructure was analyzed also.
在空气介质中用光辐射热/机械疲劳试验机对-γTiA l的热疲劳性能进行了研究,采用电阻和动态弹性模量的相对变化率表征损伤,并对其物相和组织变化进行了分析。
6) resistor
电阻
1.
Newly-developed coating system for metallic film resistors;
新型电阻(金属膜)专用镀膜机的研制
2.
Disposal of special resistor in circuit analysis;
电路分析中特殊电阻的处理
3.
A preliminary study on resistor direct preparation by laser micro-cladding resistor pastes on ceramic substrate;
激光微细熔覆电阻浆料直写电阻技术初步研究
参考词条
补充资料：电阻对焊
电阻对焊
uresistance butt welding
d一QnZUdUlho门电阻对焊(uresistanee butt welding)被焊件装配成对接接头，使其端面紧密接触，利用电阻热加热至热塑性状态后迅速施加顶锻力完成焊接的电阻焊方法。 电阻对焊是在固态时完成的，接头处的金属被电阻加热到接合面很容易发生再结晶的温度。向接头施加压力使接合面紧密接触，然后顶锻接头金属。顶锻促进了界面处的再结晶，一部分金属被挤出界面，这样可使接头处的氧化金属清除掉。对接接头可以达到与母材金属相同的性能。 电阻对焊用于金属丝轧制厂以及金属丝制品的制造。轧丝厂用这种焊接将盘条彼此连接以便于进行连续加工。也可用于制造棒材、板条和管材制成的各种产品。碳钢、不锈钢、铜合金以及铝合金都能采用此法焊接。 (率忠玉)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。