1) nonbalanced valve
不平衡的阀
2) indignation
不平
1.
Its basic connotation is to express the ambition of poet s desire for gaining achievements and the indignation of their unrecognized talents.
其基本内涵就是表现诗人渴望建功立业的宏伟抱负和怀才不遇的愤懑不平。
3) roughness
不平度
1.
System design for measuring the ground surface roughness on engineering;
工程地表面不平度测量系统设计
2.
Fractal Behavior of Tillage Soil Surface Roughness;
耕作土壤地表不平度的分形特性
3.
Analysis of Tillage Soil Surface Roughness;
耕作土壤表面不平度分析
4) unbalance
不平衡
1.
The effect of unbalanced local development on North-east clothing design;
区域发展不平衡对东北服装产品设计的影响
2.
Nonlinear Dynamics of Unbalance-looseness Coupling Faults of Rotor-ball Bearing-stator Coupling System;
转子—滚动轴承—机匣耦合系统的不平衡/松动耦合故障非线性动力学
3.
Nonlinear dynamic response analysis of unbalance-rubbing coupling faults of rotor-ball bearing-stator coupling system;
转子-滚动轴承-机匣耦合系统的不平衡-碰摩耦合故障非线性动力学响应分析
5) amount of unbalance
不平衡量
1.
This paper introduces the principle and classification of mechanical balance,the allowable amount of unbalance and balance precision in the process of mechanical manufacturing,the balance testing method and its principle,the dynamic balancing system,and digital signal processing technology for rotating parts.
介绍了机械平衡的原理及分类,以及机械制造过程中允许的不平衡量和平衡精度,并对回转件的平衡实验法及原理、动平衡测试系统以及数字信号处理技术作了介绍,根据动平衡理论分析了平衡测试技术在生产中的应用。
2.
The analysis results show that putting dynamic balancing in practice and eliminating amount of unbalance is benefit to improving the tool system.
研究表明,对刀具系统进行动平衡,消除不平衡量对高速切削具有积极意义。
6) unbalance force
不平衡力
1.
Through combining the actual condition of the piping layout of offshore platform and calculating the unbalance force caused by pulse,it confirms the method is the best.
并以海上已投产平台为例进行振动分析,计算了因脉动引起管道振动的不平衡力。
2.
Unbalance forces of the engine is the main reason for vibration of motorcycles.
发动机不平衡力输出是引起摩托车振动的直接原因,对发动机不平衡力的研究是对整车振动研究的基础。
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀 | 减压阀 | 顺序阀 | ||
控制油路的特点 | 通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0 | 通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定 | 直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力 | |
出油口情况 | 出油口与油箱相连 | 出油口与减压回路相连 | 出油口与工作回路相连 | |
泄漏形式 | 内泄式 | 外泄式 | 内泄式 | |
进油口状态及压力值 | 常态 | 常闭(原始状态) | 常开(原始状态) | 常闭(原始状态) |
工作状态 | 进出油口相通,进油口压力为调整压力 | 进油口压力低于出油口压力,出油口压力稳定在调定值上 | 进出油口相通,进油口压力允许继续升高 | |
联接方式 | 并联 | 串联 | 实现顺序动作式串联作卸荷阀用时并联 | |
功用 | 定压、溢流或安全作用限压、稳压、保压 | 减压、稳压 | 不控制系统的压力,只利用系统的压力变化控制油路的通断 | |
进油腔压力p1控制阀芯移动 | 出油腔压力p2控制阀芯移动 | 进油腔压力p1控制阀芯移动 | ||
说明:补充资料仅用于学习参考,请勿用于其它任何用途。