1) fire brick
(耐)火砖
2) firebrick
(耐)火砖
3) firebrick
耐火砖
1.
In addition,the refractory firebrick were connected by male and female connection to ensure that the flue would not leak to the shell of the duct.
后经设计者反复调研考察,将衬里结构由原龟甲网加浇注料改造为(耐)火砖涂抹耐火浇注料,且在烟道顶部前后方向设计成三块"n"形(耐)火砖,(耐)火砖之间采用凸凹配合使烟气不能泄漏到烟道壳体。
2.
It determined replacing material for the cylinder and the heat-insulation hanging piece would be replaced by the home-made firebricks.
通过对烧蚀损坏的低热值燃气轮机单筒燃烧室检查、分析,找出了损坏原因,确定筒体替代材料,开发国产(耐)火砖替代隔热挂片,对燃烧室进行了修复,积累了检修经验和技术数据。
3.
This paper discusses how to improve expand section's lining of heavy_calibre and high_tempreture, the steel_fibre lining is improved to be the lining of firebrick and fireproof material, to avoide the lining drop and meet the needs of production.
阐述了如何将大口径高温膨胀节衬里由钢纤维双层衬里改为(耐)火砖加耐火浇注料结构,避免了衬里脱落,满足了生产需要。
4) refractory brick
耐火砖
1.
Damage to refractory brick at the feed end of rotary kiln and the measure;
损坏回转窑冷端(耐)火砖的主要原因及其对策
2.
Choosing and using refractory brick accurately to eliminate chrome harm to the environment;
合理选择和使用(耐)火砖消除铬对环境的危害
3.
Measures to prolong the lifespan of refractory brick in rotary kiln;
延长回转窑(耐)火砖使用寿命的几点举措
5) Fire brick
耐火砖
1.
The study shows that using kyanite as a major raw material, high-quality mullite insulating fire bricks can be produced by adjusting the structure of pores in the bricks, the grain sizes of kyanite and sintering temperature curves.
本文研究了利用蓝晶石制作轻质莫来石(耐)火砖的可行性,并探讨了轻质莫来石(耐)火砖的基本原理及在烧成过程中的物相变化。
2.
Combined with coke oven construction work in one coking factory from management and transportation of fire brick, mud management, mark rod setting and other aspects the preparation work is elaborated as well as the requirements before masonry construction of furnace body.
结合某焦化厂焦炉施工平面布置概况 ,从(耐)火砖的管理、运输、泥浆的管理、砌砖控制线和标杆的设置等方面 ,阐述了焦炉的施工准备措施 ,提出了炉体砌筑前的必备条
3.
In this article analyed theoretically are the two types of fire brick dies with complicated force and external shape.
对外形和受力都比较复杂的两种(耐)火砖模具的强度进行研究。
6) refractory brick
耐火砖衬
参考词条
补充资料：光敏耐腐蚀耐电镀印料
分子式：
CAS号：
性质：系指通过紫外光照射固化的一类抗蚀印料，分为:(1)耐腐蚀型，稀碱溶液去膜，能耐酸性腐蚀；溶剂去膜，能耐酸及碱腐蚀。(2)耐电镀抗蚀型，稀碱溶液去膜，耐酸性电镀液，溶剂去膜，耐弱碱性、酸性电镀液；(3)堵孔型印料，碱溶；(4)加强抗蚀型，去除型(耐化学镀铜)和永久覆盖型。由碱溶性感光高分子树脂、光敏引发剂、活性稀释剂、触变剂、流平剂、着色剂等组成。将上述组分在预混合器中进行搅拌混合，再经三辊机碾磨后配制成产品。无溶剂，无气味，不污染环境，很少有针孔。在印刷中黏度不变化，具有良好的丝网印刷性能。稀碱溶液去膜，能耐三氯化铁、氯化铜、过硫酸铵等酸性蚀刻，耐硫酸铜、铅锡合金及金银等酸性电镀液腐蚀。用于丝网图形蚀刻法和图形电镀法制造印制电路图形，也可用于化学蚀刻法制造精密的金属零件和图形。
CAS号：
性质：系指通过紫外光照射固化的一类抗蚀印料，分为:(1)耐腐蚀型，稀碱溶液去膜，能耐酸性腐蚀；溶剂去膜，能耐酸及碱腐蚀。(2)耐电镀抗蚀型，稀碱溶液去膜，耐酸性电镀液，溶剂去膜，耐弱碱性、酸性电镀液；(3)堵孔型印料，碱溶；(4)加强抗蚀型，去除型(耐化学镀铜)和永久覆盖型。由碱溶性感光高分子树脂、光敏引发剂、活性稀释剂、触变剂、流平剂、着色剂等组成。将上述组分在预混合器中进行搅拌混合，再经三辊机碾磨后配制成产品。无溶剂，无气味，不污染环境，很少有针孔。在印刷中黏度不变化，具有良好的丝网印刷性能。稀碱溶液去膜，能耐三氯化铁、氯化铜、过硫酸铵等酸性蚀刻，耐硫酸铜、铅锡合金及金银等酸性电镀液腐蚀。用于丝网图形蚀刻法和图形电镀法制造印制电路图形，也可用于化学蚀刻法制造精密的金属零件和图形。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。