1) G-IPN
梯度互穿聚合物网络
2) gradient interpenetrating polymer networks
梯次化互穿聚合物网络
1.
A series of gradient interpenetrating polymer networks materials based on the systems of elastic polyurethane(PU) and vinyl ester resin(VER) were synthesized in a "simultaneous" way,with the help of testing mechanical properties,the mechanical property of the interpenetrating entanglement effect of interpenetrating polymer networks system were investigated in many points of view.
采用同步法,制备弹性聚氨酯(PU)与乙烯基酯树脂(VER)为体系的一系列梯次化互穿聚合物网络(IPNs)材料,对梯次化IPNs体系网络间的互穿缠结作用,进行多角度力学性能探讨。
3) interpenetrating polymer networks
互穿网络聚合物
1.
Studies on the mechanical property of PDAAM/PU interpenetrating polymer networks;
PDAAM/PU同步互穿网络聚合物的力学性能
2.
A new method was advocated to design distribution of gradient component in gradient interpenetrating polymer networks(IPNs), gradient IPNs of different number of layers were prepared by means of casting layer by layer, and their tensile properties were studied.
提出一种新的方法对梯度互穿网络聚合物(IPNs)中梯度组分的分布进行设计,并采用逐层浇注的方法制备了不同层数的环氧树脂/聚氨酯(EP/PUR)IPNs,对其拉伸性能进行了研究。
3.
Poly(propylene carbonate) polyurethane/poly(methylmethacraylate) interpenetrating polymer networks(PPCPU/PMMA IPNs) was synthesized by simultaneous methods.
用同步法合成了聚碳酸亚丙酯聚氨酯 /聚甲基丙烯酸甲酯互穿网络聚合物 (PPCPU/ PMMA IPN) ,调节 IPN中两组分配比制备出多种高聚物合金。
4) interpenetrating polymer network
互穿聚合物网络
1.
Synthesis and damping properties of polyacrylate latex interpenetrating polymer networks;
丙烯酸酯系胶乳互穿聚合物网络的合成及阻尼性能
2.
Processability and mechanical properties of EA/St-AN interpenetrating polymer networks;
EA/St-AN互穿聚合物网络的加工和力学性能
3.
Structure and damping properties of butyl rubber/poly(styrene-methyl methacrylate) interpenetrating polymer network;
丁基橡胶/聚(苯乙烯-甲基丙烯酸甲酯)互穿聚合物网络的结构与阻尼性能
5) Interpenetrating Network
互穿聚合物网络
1.
This paper reviewed the worldwide advances of polymer damping materials featured of interpenetrating network developed in the past few years.
综述了近年来国内外有关阻尼材料的研究成果,提出互穿聚合物网络(IPN)作为一种阻尼材料,具有其他类型高分子材料不能比拟的优势,同时展望了IPV阻尼材料的研究前景。
6) interpenetrating polymer network
互穿网络聚合物
1.
Some new studies on the toughening methods of epoxy resin,such as interpenetrating polymer network,thermoset liquid crystal polymer,core-shell polymer and nano-particles,and their recent progress were introduced in detail in this paper.
介绍了近几年来研究较为深入的互穿网络聚合物(IPN)、热致液晶聚合物(TLCP)、核壳聚合物(CSP)、纳米粒子等几种增韧环氧树脂的方法及其最新进展。
2.
A series of rigid interpenetrating polymer network(IPN) foams,based on polyurethane(PU) and epoxy resin(EP),were prepared by a simultaneous polymerization technique.
采用同步法合成了聚氨酯/环氧树脂互穿网络聚合物(PU/EP IPN)硬质泡沫,对机械性能进行了研究。
3.
Four kinds of grafted interpenetrating polymer networks(IPNs) were obtained from castor oil,toluene diisocyanate(TDI),monohydroxy-terminated acrylic (or methacrylic ) prepolymer and /or acrylic(methacrylic) monomer in the presence of dibutyltin dilaurate and redox initiators.
由蓖麻油、甲苯二异氰酸酯(TDI)、单端羟基(甲基)丙烯酸酯预聚物及/或(甲基)丙烯酸酯单体出发,在二丁基二月桂酸锡及氧化还原引发剂存在下合成了四种接枝型互穿网络聚合物(IPN)。
补充资料:梯度互穿聚合物网络
分子式:
CAS号:
性质:所谓“梯度”,系指制品的剖面上从正面到反面存在着组成的逐步变化。制品类似于用多层聚合物热合而成;但它不同处为层间的组成变化不是突变的。制备梯度聚合物的最简便的方式是利用扩散,即将单体通过浸泡扩散到另一聚合物的制品中,然后使该单体聚合。扩散可以在制品的正反两面同时进行,也可以只在其中一面上进行。由于扩散使单体从制品表面到剖面深处的浓度渐次递减,故而该单体聚合后形成的第二种聚合物也由表及里形成了“渐变”的浓度变化。
CAS号:
性质:所谓“梯度”,系指制品的剖面上从正面到反面存在着组成的逐步变化。制品类似于用多层聚合物热合而成;但它不同处为层间的组成变化不是突变的。制备梯度聚合物的最简便的方式是利用扩散,即将单体通过浸泡扩散到另一聚合物的制品中,然后使该单体聚合。扩散可以在制品的正反两面同时进行,也可以只在其中一面上进行。由于扩散使单体从制品表面到剖面深处的浓度渐次递减,故而该单体聚合后形成的第二种聚合物也由表及里形成了“渐变”的浓度变化。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条