1) fluororubber 26
氟橡胶26
2) fluorine rubber
氟橡胶
1.
Adhesion properties and mechanism of epoxy adhesive in bonding fluorine rubber to metal;
氟橡胶-金属黏接用环氧树脂胶黏剂的黏接性能与黏接机理
2.
Advance in bonding metal to fluorine rubber;
氟橡胶与金属黏接的研究进展
3.
We adopted a newly epoxy resin prepared by 4,4'-dihydroxydiphenyl sulfone and epoxy E-51,developed a newly epoxy adhesive for bonding fluorine rubber to metal,studied adhesion properties and endurance of the adhesive systematically.
用4,4’-二羟基二苯砜与E-51反应制备的树脂配制了可直接用于氟橡胶与金属粘接的新型环氧树脂胶粘剂,系统研究了胶粘剂的粘接性能及耐久性。
3) fluorosilicone rubber
氟硅橡胶
1.
Development of domestic fluorosilicone rubber;
国内氟硅橡胶的研究进展
2.
Preparation of fluorosilicone rubber with good adhesive properties;
具有良好粘接性能的氟硅橡胶的研制
3.
Effects on the heat resistant properties of copolymerized fluorosilicone rubber to metal oxide;
金属氧化物对共聚氟硅橡胶耐热性能的影响
4) fluoroether rubber
氟醚橡胶
1.
Property and application of fluoroether rubber;
氟醚橡胶的性能及其应用
2.
The compatibility of fluoroether rubber and fluorosilicone rubber blends has been studied using vulcameter,dynamic mechanical thermal analysis(DMTA)and differential scanning calorimetry(DSC).
通过硫化仪、动态机械热分析仪和示差扫描量热仪,考察了氟醚橡胶与氟硅橡胶的共混相容性。
3.
The effects of different amounts of graphite,carbon fiber,PTFE and their blending on the properties of friction and abrasion of fluoroether rubber were studied.
研究了石墨、碳纤维和聚四氟乙烯不同用量和三者并用对氟醚橡胶摩擦磨损性能的影响,并用SEM对橡胶磨损表面形貌进行了分析。
5) fluororubber
氟橡胶
1.
Study on curing kinetics of epoxy adhesive for bonding fluororubber to metal;
氟橡胶-金属粘接用环氧胶固化动力学研究
2.
Current situation and application for the fluororubber at home and abroad;
氟橡胶国内外发展现状及应用
3.
Properties of fluororubber/methyl vinyl silicone rubber blends elastomer
氟橡胶/甲基乙烯基硅橡胶共混弹性体的性能
6) fluorosilicone
[,flu:ərə'silikəun]
氟硅橡胶
1.
Study on one-component condensating type RTV fluorosilicone adhesive;
单组分缩合型室温硫化氟硅橡胶胶粘剂的研制
2.
While fluorosilicone rubber SKTFT-100 is 0.
研究了SKTFT 5 0共聚氟硅橡胶的性能 ,尤其是其低温性能 ,并与通用氟硅橡胶SKTFT 1 0 0进行了对比。
3.
The thermal ageing properties in air and adhesion at 200 ℃of the heat curing fluorosilicone adhesive were investigated.
研究了氟硅橡胶胶粘剂的热空气老化性能和高温粘接性能。
补充资料：氟橡胶26
分子式：
CAS号：
性质：偏氟乙烯和六氟丙烯的共聚物。白色、无臭、无毒、不易燃的固体。密度1.80～1.82g/cm3。突出的性能是耐高温、耐化学腐蚀、耐油、抗氧化。在空气中250℃长期使用，300℃短期使用。低温时橡胶的弹性只保持到-15℃。硫化胶拉伸强度9.8～21.6MPa，伸长率180％～350％。耐候、耐臭氧、透气性较低。用途见氟橡胶。
CAS号：
性质：偏氟乙烯和六氟丙烯的共聚物。白色、无臭、无毒、不易燃的固体。密度1.80～1.82g/cm3。突出的性能是耐高温、耐化学腐蚀、耐油、抗氧化。在空气中250℃长期使用，300℃短期使用。低温时橡胶的弹性只保持到-15℃。硫化胶拉伸强度9.8～21.6MPa，伸长率180％～350％。耐候、耐臭氧、透气性较低。用途见氟橡胶。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条