1) flame spray coating
火焰喷镀
2) flame plating
喷镀，焰镀
3) flames spray-welding
火焰喷焊
1.
WC/Ni coating was made on TC4 alloys surface by using flames spray-welding,and the microstructure, composition,phase structure and microhardness of the coating were tested and analyzed.
采用火焰喷焊技术对TC4合金表面喷焊Ni基WC。
2.
The possibility of Ni-based WC coating on titanium alloys substrate through flames spray-welding technique was explored,and the microstructure and properties of the coating were determined using SEM,XRD and so on.
研究了在钛合金Ti-6A l-4V表面上采用火焰喷焊技术制备镍基碳化钨型自熔性合金涂层的可行性,利用SEM、XRD等手段分析了它的组织和性能。
3.
Two kinds of Ni-base coatings with 0% and 4% La2O3 addition respectively on titanium alloys substrate made by flames spray-welding technique were prepared, and their microstructure, elemental distribution, micro-hardness and tribological properties under dry sliding against steel were studied.
采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4%(质量分数)La2O3两种镍基涂层,分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。
4) flame spray fusion
火焰喷熔
1.
Improvement of fatigue strength of Q235 steel welded joint by modification of flame spray fusion;
火焰喷熔修形法提高Q235钢焊接接头疲劳性能的研究
5) flame spraying
火焰喷涂
1.
Experimental study of wear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;
火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
2.
Influence of spraying distance of ceramic soft wire flame spraying on properties of layer;
陶瓷软线材火焰喷涂距离对涂层性能的影响
3.
On the properties of nylon 1010/nanometer TiO_2 coatings by flame spraying;
火焰喷涂尼龙1010/纳米TiO_2复合涂层力学性能研究
6) flame spray-welding
火焰喷焊
1.
Ni60+WC clad layers on the 45 steel substrate were produced by l aser cladding and flame spray-welding,respectively.
分别采用激光熔覆与粉末火焰喷焊两种技术在45钢基体表面制备Ni60+20%WC合金涂层,比较其组织结构和性能。
补充资料：火焰喷镀
分子式：
CAS号：
性质：热喷涂的一种。采用氧-乙炔焰作热源，外加压缩空气流将喷涂材料熔滴雾化，并推动熔粒成喷射的粒束。所用喷涂材料有金属或非金属的线材、棒材或粉末。广泛用于钢铁构件、机械零部件、化工容器等表面，制成耐蚀、耐高温氧化、耐磨的涂层。
CAS号：
性质：热喷涂的一种。采用氧-乙炔焰作热源，外加压缩空气流将喷涂材料熔滴雾化，并推动熔粒成喷射的粒束。所用喷涂材料有金属或非金属的线材、棒材或粉末。广泛用于钢铁构件、机械零部件、化工容器等表面，制成耐蚀、耐高温氧化、耐磨的涂层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条