1) polysul-phoneamide resin
聚砜酰胺树脂
2) polyamide resin
聚酰胺树脂
1.
Epoxy-bakelite-polyamide resin varnish;
环氧-酚醛-聚酰胺树脂掺混清漆
2.
Study on interface modifying of bamboo fiber reinforced polyamide resin composite;
竹纤维增强聚酰胺树脂复合材料界面改性
3.
The adsorption and desorption capability of five different macroporous resins LSA-20,LSA-21,LSA-30,D-101,AB-8 and polyamide resin in static state were studied by UV-Vis.
比较了五种大孔吸附树脂和聚酰胺树脂对阿尔泰狗哇花总皂苷的吸附与脱附性能。
3) polyamide resins
聚酰胺树脂
1.
This paper introduces a alcohol-soluble polyamide resins was prepared by co-polycondesation with dimer acid and diamine as primary raw.
介绍了一种由二聚酸和二元胺为主要原料制备而成的醇溶性聚酰胺树脂。
2.
This paper introduces the requirements of polyamide resins derived by dimer acids and diamines as primary raw,ap-plied printing ink and the situation at home and abroad and the trend of development.
介绍了由二聚酸与二元胺为主要原料生产的聚酰胺树脂用于油墨的条件、国内外情况及发展趋势。
3.
The technics of adsorption and elution of nuciferine with polyamide resins as adsorbent was studied.
探讨了聚酰胺树脂对荷叶碱的吸附和洗脱工艺。
4) polyamide
[英][pɔli'æmaid] [美][,pɑli'æm,aɪd]
聚酰胺树脂
1.
Study on the morphology and crystallization behavior of column chromatography polyamide
层析聚酰胺树脂的微观形态和结晶性能研究
2.
The thermodynamics and dynamics for adsorption of picric acid onto polyamide under static conditions were studied and the influence of temperature on the adsorption was also inspected.
在静态下,考察了温度对聚酰胺树脂吸附水溶液中苦味酸的影响,探讨了吸附的热力学、动力学规律。
3.
Then, the catechin is dissolved by 40% sulfuric acid solution (mass fraction) after being washed by water, and through the polyamide column.
用ZnCl2 作沉淀剂 ,当溶液pH值为 5 6～ 6 5时 ,将茶叶浸提液中的儿茶素以金属盐的形式沉淀 ,沉淀物经洗涤后 ,用质量分数为 4 0 %的硫酸溶解 ,然后将溶液直接加入聚酰胺树脂柱上 ,先用蒸馏水将Zn2 + ,Na+ 等无机离子除去 ,再用乙醇将茶多酚洗脱 ,洗脱液经浓缩、干燥 ,得到纯度高于 99%的高纯酯型儿茶素 ,提取率达 10 。
5) polysulfone
聚砜树脂
1.
This paper reviewed the research, application and market situation of the special engineering plastics developed in recent years at home and abroad, including polyketone, polyimide, poly(p-phenylene sulfide) and polysulfone resins, etc.
综述了近年来国内外特种工程塑料(如聚酮树脂、聚酰亚胺、聚苯硫醚以及聚砜树脂等)的市场状况以及研究与应用进展,重点论述了特种工程塑料的分类、特征以及在航天航空、电子信息、医疗卫生、能源等高科技领域中的应用。
2.
To study the effect of strain rate on mechanical properties of polysulfone,tensile tests at different strain rates were performed,and the shape changes of samples during testing were recorded by camera also.
为了研究应变率对聚砜树脂力学性能的影响,对其进行了不同应变率的拉伸试验,同时通过摄像机记录了拉伸过程中试样形状的变化。
6) polysulfonamide
聚砜酰胺
1.
Preparation and performance of polysulfonamide nanocomposites and it′s fiber;
聚砜酰胺纳米复合材料及其纤维的制备和表征
2.
In this paper, on the basis of intermittent polymerization, twin screw extruder chosen as the reactor, the semi-continuous polymerization of polysulfonamide is investigated.
聚砜酰胺纤维是耐热性能优异的耐高温纤维。
3.
The influences of concentration of coagulation bath,temperature of spinning liquid,macromolecular regularity,polymer relative molecular weight,salinity,and the content of third monomer on the coagulation properties of polysulfonamide are researched.
研究了凝固浴浓度、原液温度、聚合物相对分子质量、凝固浴中的盐分、共聚物分布序列和第三单体物质的量对聚砜酰胺原液的凝固值和临界浓度的影响。
补充资料：聚砜酰胺树脂
分子式：
CAS号：
性质：又称聚对苯二甲酰二苯砜二胺(polytereph-thaloyl dimnide phenylene sulfone)。由3,3′-二氨基二苯砜和4,4′-二氨基二苯砜与对苯二甲酰氯在二甲基乙酰胺溶液中低温缩聚制备。外观为红棕色透明溶液，溶液中树脂固体含量12％～14％。使用温度180℃，分解温度400％。强度较好，电绝缘性好，耐化学腐蚀，可制作塑料、薄膜、纤维、涂料等。
CAS号：
性质：又称聚对苯二甲酰二苯砜二胺(polytereph-thaloyl dimnide phenylene sulfone)。由3,3′-二氨基二苯砜和4,4′-二氨基二苯砜与对苯二甲酰氯在二甲基乙酰胺溶液中低温缩聚制备。外观为红棕色透明溶液，溶液中树脂固体含量12％～14％。使用温度180℃，分解温度400％。强度较好，电绝缘性好，耐化学腐蚀，可制作塑料、薄膜、纤维、涂料等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条