1) polyundecanoylamide resin
聚十一酰胺树脂
2) PA12
聚十二内酰胺树脂
3) nylon 13
聚十三内酰胺树脂
4) polyamide resin
聚酰胺树脂
1.
Epoxy-bakelite-polyamide resin varnish;
环氧-酚醛-聚酰胺树脂掺混清漆
2.
Study on interface modifying of bamboo fiber reinforced polyamide resin composite;
竹纤维增强聚酰胺树脂复合材料界面改性
3.
The adsorption and desorption capability of five different macroporous resins LSA-20,LSA-21,LSA-30,D-101,AB-8 and polyamide resin in static state were studied by UV-Vis.
比较了五种大孔吸附树脂和聚酰胺树脂对阿尔泰狗哇花总皂苷的吸附与脱附性能。
5) polyamide resins
聚酰胺树脂
1.
This paper introduces a alcohol-soluble polyamide resins was prepared by co-polycondesation with dimer acid and diamine as primary raw.
介绍了一种由二聚酸和二元胺为主要原料制备而成的醇溶性聚酰胺树脂。
2.
This paper introduces the requirements of polyamide resins derived by dimer acids and diamines as primary raw,ap-plied printing ink and the situation at home and abroad and the trend of development.
介绍了由二聚酸与二元胺为主要原料生产的聚酰胺树脂用于油墨的条件、国内外情况及发展趋势。
3.
The technics of adsorption and elution of nuciferine with polyamide resins as adsorbent was studied.
探讨了聚酰胺树脂对荷叶碱的吸附和洗脱工艺。
6) polyamide
[英][pɔli'æmaid] [美][,pɑli'æm,aɪd]
聚酰胺树脂
1.
Study on the morphology and crystallization behavior of column chromatography polyamide
层析聚酰胺树脂的微观形态和结晶性能研究
2.
The thermodynamics and dynamics for adsorption of picric acid onto polyamide under static conditions were studied and the influence of temperature on the adsorption was also inspected.
在静态下,考察了温度对聚酰胺树脂吸附水溶液中苦味酸的影响,探讨了吸附的热力学、动力学规律。
3.
Then, the catechin is dissolved by 40% sulfuric acid solution (mass fraction) after being washed by water, and through the polyamide column.
用ZnCl2 作沉淀剂 ,当溶液pH值为 5 6～ 6 5时 ,将茶叶浸提液中的儿茶素以金属盐的形式沉淀 ,沉淀物经洗涤后 ,用质量分数为 4 0 %的硫酸溶解 ,然后将溶液直接加入聚酰胺树脂柱上 ,先用蒸馏水将Zn2 + ,Na+ 等无机离子除去 ,再用乙醇将茶多酚洗脱 ,洗脱液经浓缩、干燥 ,得到纯度高于 99%的高纯酯型儿茶素 ,提取率达 10 。
补充资料：聚十一酰胺树脂
分子式：
CAS号：
性质： 学名聚酰胺11(polyamide11)或聚ω-氨基十一酸。商品名尼龙11(nylon 11)。白色半透明热塑性树脂。相对密度1.04～1.05，熔点187℃，拉伸强度50～59MPa，冲击强度(缺口)3.8kJ/m2，体积电阻率1013Ω·cm，介电强度16.7kV/mm，热变形温度(1.82MPa)54℃，自熄。有尼龙类树脂的通性，特点是相对密度小，吸水性低，柔软，耐低温性优良。由ω-氨基十一酸在热压釜中缩聚而成。适于注塑、挤塑、真空成型、旋转成型和离心浇铸等。可增塑、增强填充改性。特别适合制作各种软管、包装薄膜、电缆护套、耐磨损部件，军工宇航材料。粉末可用于滚动浸涂和静电喷涂赋予金属表面耐磨性和耐药品性。
CAS号：
性质： 学名聚酰胺11(polyamide11)或聚ω-氨基十一酸。商品名尼龙11(nylon 11)。白色半透明热塑性树脂。相对密度1.04～1.05，熔点187℃，拉伸强度50～59MPa，冲击强度(缺口)3.8kJ/m2，体积电阻率1013Ω·cm，介电强度16.7kV/mm，热变形温度(1.82MPa)54℃，自熄。有尼龙类树脂的通性，特点是相对密度小，吸水性低，柔软，耐低温性优良。由ω-氨基十一酸在热压釜中缩聚而成。适于注塑、挤塑、真空成型、旋转成型和离心浇铸等。可增塑、增强填充改性。特别适合制作各种软管、包装薄膜、电缆护套、耐磨损部件，军工宇航材料。粉末可用于滚动浸涂和静电喷涂赋予金属表面耐磨性和耐药品性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条