1) TTOP-12
TTOP-12钛酸酯偶联剂
2) titanate coupling agent
钛酸酯偶联剂
1.
Application of titanate coupling agents in the inorganic fillers system;
钛酸酯偶联剂在无机填料中的应用
2.
Attapulgite was modified by titanate coupling agent NDZ311 in isopropyl alcohol by means of ultrasonic dispersion.
采用异丙醇溶解的钛酸酯偶联剂NDZ-311对凹凸棒石粘土进行超声湿法表面改性。
3.
Surface characters of anhydrite powder modified by titanate coupling agent,effects of the anhydride powder before and after modification on mechanical properties of PVC compounds and the conjoint state of PVC compounds with modified or unmodified anhydrite powder were studied.
作者研究了经钛酸酯偶联剂改性的硬石膏粉的表面性质、改性前后硬石膏粉对聚氯乙烯(PVC)复合材料的力学性能的影响以及改性前后硬石膏粉与PVC的结合情况。
3) titanate coupling reagent
钛酸酯偶联剂
1.
The surface organic modification of nano-antimicrobial and nano-antistatic agents with titanate coupling reagent,then the nano-particle is observed and investigated with the aid of TEM and contact angle dataphysics and FTIR.
选用钛酸酯偶联剂对纳米抗菌和抗静电混合粒子进行了表面修饰,并用透射电镜、接触角和红外光谱三种方法进行了表征,将经修饰的粒子与聚丙烯共混并熔融纺丝,考察了其纺丝及拉伸性能。
2.
In order to improve the diapersity of alumina polymer of high molecules and raise the biding intensity of interfaces of two phases,the surface modification of alumina by titanate coupling reagent is adopted.
为了改善氧化铝在高分子聚合物中的分散性,提高界面接合强度,采用钛酸酯偶联剂对氧化铝进行表面改性,使α-A l2O3粉体由亲水表面变成了亲油表面,提高了α-A l2O3在有机基体中的分散性和相容性,降低了体系的粘度指标,改善了加工工艺,增强了界面结合。
4) coupling agent of organic titanate
钛酸酯偶联剂
1.
Study on modification of precipitated CaCO_3 and French white by coupling agent of organic titanate;
沉淀碳酸钙和滑石粉的钛酸酯偶联剂改性研究
2.
Using chemical-bond theory,on the basis of theory model,the paper studies the amount of coupling agent of organic titanate in copperepoxy resin conductive paint.
应用化学键理论,在前人提出的理论模型基础上,考察了一种复合单烷氧型钛酸酯偶联剂在铜-环氧屏蔽导电涂料中的最佳用量问题,结果表明理论值和试验值有很大差别,并对此进行了分析。
3.
In this paper,performance changes of polypropylene(PP) that filled with rigid inorganic material nano or micron sized CaCO3 and the impacts of surface modified nano-sized CaCO3 with coupling agent of organic titanate on CaCO3/PP composite material′s mechanical properties were studied.
研究了无机刚性材料纳米或微米碳酸钙对聚丙烯(PP)的填充改性以及利用钛酸酯偶联剂对纳米碳酸钙进行表面处理后,对于碳酸钙/聚丙烯复合材料体系的力学性能的影响。
5) NDZ201
钛酸酯偶联剂NDZ201
1.
The influences on some main sulfuration characteristics and mechanical performances of EPDM Fillellwith Superfine Talc Powder by four active additions, triallylisocyanurate (TAIC), N, N' - m - benzylbismaleimide(MPBM), a coupling agent Si - 69 and NDZ201 are discussed in this paper.
研究了活性助剂三烯丙基异氰脲酸酯(TAIC)和N,N—间苯撑双马来酰亚胺(MPBM)以及硅烷偶联剂Si-69和钛酸酯偶联剂NDZ201对超细滑石粉填充三元乙丙橡胶重点硫化特性和力学性能的影响。
6) titanate coupling agent NDZ-311
钛酸酯偶联剂NDZ-311
1.
Study on wet modification of heavy calcium carbonate with titanate coupling agent NDZ-311;
钛酸酯偶联剂NDZ-311湿法改性重钙的研究
补充资料：TTOP-12钛酸酯偶联剂
相应的国外牌号有KR-12，化学名称为三 (二辛基磷酰氧基)钛酸异丙酯，无色或红棕色液体，密度 0.99．粘度30～250mm2／s，闪点(开口)＞25℃。热稳定性和水解稳定性良好，有一定的阻燃效果。LD5070000mg／kg。
适用于聚甲醛、聚乙烯、PVC、环氧树脂、不饱和聚酯、聚苯乙烯、ABS、碳酸钙等。参考用量0.4%～0. 6％。贮存于阴凉、通风的库房内。
适用于聚甲醛、聚乙烯、PVC、环氧树脂、不饱和聚酯、聚苯乙烯、ABS、碳酸钙等。参考用量0.4%～0. 6％。贮存于阴凉、通风的库房内。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条