1) high chromium iron fibers
高铬铁纤维
1.
The effects of heat treatment on structure and magnetic properties of heavily deformed high chromium iron fibers samples were investigated.
研究了热处理对大变形高铬铁纤维样品的结构和磁性的影响。
2) high chromium
高铬
1.
Unusual failure of high chromium centrifugal composite cast iron roll and preventative measures;
高铬离心复合铸铁轧辊的非正常失效及预防
2.
The practice is introduced for producing extra-low carbon ferrochromium with Perrin process of adding some silico-chromium to reduce FeO in molten chrome ore-lime to increase the ratio of Cr/Fe , and producing high chromium products (Cr≥72%) with this melt.
介绍了波伦法冶炼微碳铬铁过程中,先加入部分硅铬还原铬矿-石灰熔体中的Feo,以提高Cr/Fe;然后用此熔体生产出含Cr≥72％的高铬产品的生产实践。
3.
The study is conducted on producing extra-low FeCr containing high chromium and low phosphorus with converter MC FeCr slag.
研究了转炉中铬渣生产高铬低磷微碳铬铁,实验证明:工艺可行,缺点是合金不能脱硫。
3) high chromium cast steel
高铬铸钢
1.
The laser melting was performed on high chromium cast steel nozzle of power boiler burner.
对电站锅炉燃烧器喷嘴用高铬铸钢材料进行了激光熔凝处理,研究了激光熔凝处理后高铬铸钢表面熔凝层的显微组织、相结构、维氏硬度及耐磨性能。
2.
This paper deals with the granular carbides formation from hot deformation in high chromium cast steel.
本文探讨了热变形高铬铸钢中颗粒状碳化物的形成。
4) high chromium cast iron
高铬铸铁
1.
Effects of compound modification on microstructure of hypereutectic high chromium cast iron;
复合变质对过共晶高铬铸铁凝固组织的影响
2.
Characteristic anlysis and material selection of high chromium cast iron for transflux parts of slurry pump;
渣浆泵过流件用高铬铸铁材料特性分析与选择
3.
A study on hardening behavior for high chromium cast iron 16Cr2MolCu under sub-critical treatment;
16Cr2Mo1Cu高铬铸铁在亚临界处理中硬化行为研究
5) high-chromium cast iron
高铬铸铁
1.
Cryogenic Treatment and the Properties of High-chromium Cast Iron;
深冷处理与高铬铸铁性能
2.
The effect of Ti on the microstructure of the 4wt%C-20wt%Cr hypereutectic high-chromium cast iron was studied in this paper.
研究了不同的含Ti量对4C-20Cr(质量分数,%)过共晶高铬铸铁显微组织的影响。
3.
Compared with high-chromium cast iron,the rolling wear properties of high-vanadium high-speed steel(HVHSS) were studied on the self-developed wear testing machine,and the failure mechanism was analyzed via electron microscope.
以高铬铸铁为参照,在自制的模拟轧辊磨损试验机上研究了高钒高速钢的滚动磨损性能。
6) High chromium corundum
高铬刚玉
1.
With high chromium corundum chosen as the refractory & aggregating material,and an phenol resin and PVB as the bonding agent,hereon,by applying orthogonal experiment to the above,consequently,an optimum ingredient ration is set up,conceming mould vanishing with alcohol base coating material for high manganese steel pieces to be casted.
选用高铬刚玉为耐火骨料 ,酚醛树脂和 PVB为粘结剂 ,通过正交试验 ,确定了高锰钢铸件消失模醇基涂料的最佳配比 ,考察了涂料的多种性能 ,并进行了生产验证。
2.
An optimum ingredient ration phosphate ceramic slurry was set up,by means of orthogonal experiment,with high chromium corundum chosen as the refractory and aggregating mateial,and aphosphate as the bonding agent.
选用高铬刚玉为耐火骨料、磷酸盐等为粘结剂、氧化镁为固化剂 ,通过正交试验 ,确定了磷酸盐陶瓷浆料的最佳配比 ,并考察了陶瓷浆料的多种性能、进行了精密铸件的生产应用。
参考词条
补充资料：高强度高模量聚乙烯纤维
分子式：
CAS号：
性质：又称高强度高模量聚乙烯纤维。指分子量在100万～500万的聚乙烯所纺出的纤维。密度0.97～0.98g/cm3。强度2.8～4N/tex。模量91～140N/tex。延伸度3.5％～3.7％。冲击吸收能比对位芳酰胺纤维高近一倍，耐磨性好，摩擦系数小，但应力下熔点只有145～160℃。制法是用齐格勒催化剂制备树脂后，以十氢萘或石蜡油、灯油为溶剂进行凝胶纺丝，或以石蜡烃为熔剂进行“半熔纺”而得。用途有防弹背心和头盔、轻质装甲、船帆、缆绳、光缆补强体降落伞和滤材等。
CAS号：
性质：又称高强度高模量聚乙烯纤维。指分子量在100万～500万的聚乙烯所纺出的纤维。密度0.97～0.98g/cm3。强度2.8～4N/tex。模量91～140N/tex。延伸度3.5％～3.7％。冲击吸收能比对位芳酰胺纤维高近一倍，耐磨性好，摩擦系数小，但应力下熔点只有145～160℃。制法是用齐格勒催化剂制备树脂后，以十氢萘或石蜡油、灯油为溶剂进行凝胶纺丝，或以石蜡烃为熔剂进行“半熔纺”而得。用途有防弹背心和头盔、轻质装甲、船帆、缆绳、光缆补强体降落伞和滤材等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。