1)  distribution cone
分流锥
1.
The tungsten based alloy 93W-5Ni-2Cu is proposed as the distribution cone to replace the H13(4Cr5MoSiV)die steel, and the results of CAE numerical simulation show that the original casting technology and the mechanical properties of the wheel hub center plate are improved.
提出了用钨基合金(93W-5Ni-2Cu)代替H13(4Cr5MoSiV)模具钢作分流锥材料,通过CAE数值模拟与分析验证了钨基合金对原铸造工艺和轮毂中心盘的力学性能均有所改善,并通过实际生产验证大大提高了低压轮毂模具分流锥的使用寿命,同时也提高了轮毂质量和生产率。
2)  die cone
模头分流锥
3)  diffluence
分流
1.
A Simple Practical Equipment of Pour_diffluence;
一种简单实用的灌装分流装置
2.
A Study on Distribution of Native Place of Successful Candidates in Imperial Examination System and Diffluence in Late Qing;
晚清进士籍贯分布及分流研究
3.
It analyze the problem of water environment in the lower Minjiang River:the changed diffluence of South,North branch caused had effect;the excessive quarry caused the declination of riverbed and destroyed the construction;there was problem at water quality and it affect the use of life and industry;marsh is destroyed and it lead to the kind of animal and plant in marsh decreasing.
分析闵江下游的水环境问题是:南、北港分流比变化造成北港冲刷,南港淤积,并带来严重后果;河道采砂过量使河床下切严重,破坏水工建筑物;水质存在一些问题,影响生活及工业用水;湿地遭到破坏,导致湿地动植物数量与种类大量减少。
4)  diversion
分流
1.
Sandstone diversion acidization technology of viscoelastic surfactant micelle fluid;
粘弹性表面活性剂胶束酸在砂岩储层分流酸化中的应用
2.
Study on effects of Songzi bleeder diversion on fluvial evolution of Lujia river;
松滋口分流及其对芦家河河势影响研究
3.
This paper designs and evaluates traffic diversion plans with the application of traffic simulation.
运用交通仿真技术进行分流方案设计和评价,从行程时间、燃油消耗、沿线速度等方面进行了交通仿真的应用研究,采用美国TSIS仿真软件对某高速公路分流方案进行了实例分析。
5)  shunt
分流
1.
Application of artificial blood vessel ring to portaca val shunt for portal hypertension;
应用带环人造血管行门腔分流治疗门静脉高压症
2.
Tolerance of portal vein occlusion by meso-caval shunt in Bama swines;
肠腔分流条件下猪单纯门静脉阻断的安全时限
3.
In this paper,the curves of Dynamic Resistance CurveDRCare studied under the influence of shunt and distortion.
研究了分流和翘曲变形影响下的不锈钢点焊动态电阻曲线,发现了动态电阻曲线的准稳态电阻值与熔核直径之间的对应关系。
6)  distributary
分流
1.
Talk about Science and Humane Distributary and Circulation;
论科学与人文的分流与融通
参考词条
补充资料:部分流泵
分子式:
CAS号:

性质:又称圣达因泵。从叶轮流出的液体只在扩散管处有一部分输出,其余大部分液体仍在泵体环形空间流道中循环的一种高扬程、小流量高速离心泵。主要由泵体、密封体、增速器三部分组成。泵叶轮为单级悬臂式,采用全开式辐射型直叶片。叶轮前一般有变螺距螺旋式诱导轮。密封体内设有机械密封装置,有单端面式、双端面式和双列单端面串联式三种形式。增速器多为二级增速,使泵转速达20000r/min左右。扬程高(出口静压达17MPa),轴向推力小,结构紧凑,可用于输送悬浮液和高黏度液体。但效率较低,增速器和机械密封寿命低。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。