1) wear efficiency
磨损效率
2) wear rate
磨损速率，磨损率
3) wear failure
磨损失效
1.
Wear Failure Analysis and Its Control of CA6DF2L-30 Diesel Engine Flywheel by Experimental and Finite Element Method;
CA6DF2L-30型柴油机飞轮磨损失效的实验与有限元分析及其控制
2.
This paper has summarized the modality of mining scraper conveyor's wear failure and the wear failure mechanism which based on author's investigative information.
根据调研获得的资料,综合分析了矿用刮板输送机主要零部件的磨损失效形式及机理,并对如何提高刮板输送机的使用寿命提出了具体的应对措施。
5) electrical wear ratio
电磨损率
1.
In this experiment,the results show that the electrical wear ratio of the tested Cu-Cr-Zr alloy increased obviously with the enhanced currents in the electrical wear course of the contact wire vs.
结果表明,在试验条件下,在合金接触线-黄铜粉末冶金滑块系统的电磨损过程中,Cu-Cr-Zr合金接触线的电磨损率随电流强度升高显著加强,由加载较小电流引起的磨损份额为0。
6) wear rate
磨损率
1.
Micro-wear test of soft materials(Ⅰ)——Wear scar measurement and wear rate calculation
软材料的微磨损测试研究(Ⅰ)——磨痕测量与磨损率计算
2.
The test study of roadheader cutting pick′s wear rate based on image process
基于图像处理的对掘进机截齿磨损率的研究
3.
The results showed that wear rate of CuNiMnFe alloy increases at the beginning stage and then decreases with increasing rotate speed and prolonging working time under no lubricant.
试验结果表明,干摩擦条件下CuNiMnFe合金的磨损率随着摩擦时间的增加而降低;随着转速的提高,呈先增加后降低的趋势。
补充资料：配置效率和生产效率
在经济学上，经济发展的动力，或者说效率的来源，分为两类：一类是配置效率，二是生产效率。所谓配置效率，是指给定资源和技术的条件下，怎么样使资源从边际生产率低的地方流向边际生产率高的地方，从而使得资源和利用更合理、社会总价值达到最大;而生产效率是指如何通过技术进步提高每一种资源的生产率，也就是把社会的生产可行性边界向外移。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条