1.
The slow speed reduces mechanical wear effect in the agitating process.
慢速旋转将减少在搅拌过程中机器的磨损效应。
2.
Tribological Effect of Lubricating Oil Additive EDT with Wear-Self-Compensation Function
润滑添加剂的磨损自补偿摩擦学效应
3.
The bulk deformation, fatigue and plough were the major wearing mechanism.
结果表明:合金的主要磨损机制是体积塑性变形、沟效应和疲劳磨损。
4.
The failure of the hollow cylinder roller bearing is stress corrosion wearing.
空心圆柱滚子轴承为应力腐蚀磨损失效。
5.
Mechanical Analysis of Work Roller's Surface Stress and Wear Failure on Cold Rolling
冷轧工作辊表面应力及磨损失效的力学分析
6.
Size Effect on the Wear Rate Testing of the Friction Pairs of Brass Pin on Steel Dics
铜销对钢盘摩擦副磨损率测试的尺寸效应
7.
Fai lure of brake disc is only judged with wear quantity,but not damage quantity.
制动盘的失效不能用受损伤量来衡量，宜应该用磨损量来判断。
8.
The Effect of Disc Abrasion on Pulp Refining
磨片磨损对打浆生产使用效果的影响
9.
Contact Stress and Fatigue Wear Failure Analysis of Medium-sized CNG Engine Cam/Tappet;
中型CNG发动机凸轮/挺柱接触应力与疲劳磨损失效分析
10.
The wear and tear invalidity of rubber bush in the vibation grinding machine is discussed by theoretical analysis and applicable study with a example.
本文通过一个案例，对于振动磨机橡校衬套的磨损失效进行了理论分析和应用研究。
11.
Failure analysis of chute abrasion in scraper conveyor and anti-wear measures
刮板输送机中部槽磨损失效分析与抗磨措施
12.
Under high stress or low stress abrasion working conditions, high Cr white cast iron can be used just after it having been air quenched.
高应力磨料磨损或低应力磨料磨损工况条件下,高铬白口铸铁空淬后不须回火可直接应用。
13.
Bearings with modest hardness able to avoid axis wear.
软硬适中的轴承，有效防止轴心磨损。
14.
Effective Hybrid Wear-leveling Algorithm for Flash Memory Management
一种有效的混合式闪存磨损均衡算法
15.
The Design of Ni60A/MoS_2 Composite Coating and its Wear Failure Mechanism
Ni60A/MoS_2复合涂层设计及磨损失效机理
16.
Analysis of Wear-failure of Surface Metallurgy Coatings and Countermeasures
表面冶金涂层的磨损失效形式与对策
17.
Research on the Wear Failure of Colliery Hoister Journal Bearing
煤矿提升机滑动轴承的磨损失效分析
18.
A Study of Low-stress Washing Abrasive Wear of W-alloy White Cast Irons
钨系合金白口铸铁低应力冲蚀磨料磨损的研究