1) inverse heat conduction problem
导热反同题
2) heat conduction
导热
1.
Verification ard simulation of the heat conduction model of woodceramics;
木材陶瓷导热行为的模拟与验证
2.
Wall temperature calculation on an axi-symmtrical converging-diverging nozzle considering heat conduction,convection and radiation;
考虑导热对流和辐射作用的轴对称收扩喷管壁温计算
3.
Summary of the application of MATLAB in heat conduction and convection problems;
综述应用MATLAB软件求解导热和对流问题
3) thermal conductivity
导热
1.
Effect of boric acid on carbon fiber and thermal conductivity of C/C composites;
硼酸对炭纤维及C/C复合材料导热性能的影响
2.
Using tetrafluoroethylene-hexafluoropylene coplymer(FEP) as a matrix,aluminum nitride(AlN) particles modified by coupling agents as filler,the FEP/AlN composites with high thermal conductivity and insulating charateristics were achieved by the blending and hot press molding in this paper.
采用聚全氟乙丙烯(FEP)为基体,偶联处理的氮化铝(AlN)为填料,通过共混、模压等方法制备了高导热、高绝缘的FEP/AlN复合材料。
3.
Once all parameters are known, the thermal conductivity of resin compo-sites filled.
本文研究了树脂基复合材料热导率,提出了环氧树脂中加入填料的新导热模型。
4) thermal conductive
导热
1.
The thermal conductive and electrical insulating polymer(TCEIP) is one of such materials.
文章以热塑性树脂和热固性树脂两大类基体的复合材料为主线,以复合材料的制备方法和导热相的形态因子对复合材料热导率的影响因素为主要内容,简述了近几年在导热热固性树脂和热塑性树脂复合材料方面的研究进展。
2.
This paper introduces the application of nano powder in thermal conductive materials,including micro-scale thermal science and nano enhancing thermal conductive mechanism,thermal conductive nano material,nano inorganic/organic composite thermal conductive materials and thermal conductive materials for micro/nano device.
介绍了纳米粉体在导热材料中的应用,包括微尺度热科学及纳米强化传热机制,导热纳米粉体材料,纳米无机/有机复合导热材料,微/纳米器件用导热材料等。
3.
The thermal conducting mechanism and the methods of preparation of insulating and thermal conductive plastics were briefly introduced.
介绍了树脂基导热复合材料的导热机理,重点介绍高耐热、高刚性热塑性树脂基复合导热绝缘塑料的制备。
5) thermal conduction
导热
1.
Microstructure and thermal conduction property of SiCp/Al-Si composite with high reinforcement content;
高体积分数SiCp/Al复合材料的微观组织与导热性能
2.
An island-network model was proposed for thermally conductive polymer matrix composites and a thermal conduction equation was formulated based on the percolation theory.
根据导热填料在聚合物基体中的分布,提出了导热聚合物基复合材料两相体系的“海岛-网络”模型;并结合逾渗理论及其在导电复合材料中的应用,建立了导热复合材料的逾渗热导率方程。
3.
Cooling flux test of the valve and thermal conduction test of two layer refractory lining of valve plate are made.
给出阀板冷却水管道的计算及试验结果,介绍了微水节能热风阀的用水量试验和阀板耐火内衬的导热性能试验,计算了阀板耐火内衬的传热系数 K′。
6) conduction
导热
1.
Application of MatLab in analysis of steady state and unsteady state heat conduction;
MATLAB在稳态与动态导热过程分析中的应用
2.
Discussion on initial value problem stability in unsteady-state heat conduction;
非稳态导热初值问题稳定性条件的分析
3.
This paper established the mathematic model for the two-dimensional steady-state heat conduction in rectangular fins,solved the mathematic model by using the finite difference method(FDM),drew the degree distribution under different circumstances,and found the factor influencing heat loss.
建立了矩形直肋二维稳态导热的数学模型,使用有限差分法对建立的数学模型进行了数值求解,绘制了不同条件下肋片的温度场分布,找出了影响肋片散热的因素;从肋效率出发比较了一维模型和二维模型之间的差别,提出了可以将二维模型简化为一维模型的判据。
参考词条
补充资料：早春同庾侍郎题青龙上方院
【诗文】：
相见惜馀辉，齐行登古寺。风烟结远恨，山水含芳意。
车马莫前归，留看巢鹤至。
【注释】：
【出处】：
全唐诗：卷284_17
相见惜馀辉，齐行登古寺。风烟结远恨，山水含芳意。
车马莫前归，留看巢鹤至。
【注释】：
【出处】：
全唐诗：卷284_17
说明：补充资料仅用于学习参考，请勿用于其它任何用途。