1) horizontal continuity
水平连续
1.
30s~(-1),for the thermocline,halocline and sound-cline respectively,can be adopted for both the shallow sea(<200 m) and the open seas(>200 m) in the summer and the autumn to ensure the horizontal continuity of the thermocline,halocline and sound-cline,while in win.
30s-1,来保证跃层的水平连续分布。
2) horizontal discontinuity
水平不连续
1.
Based on observations data in the northeastern East China Sea and South China Sea,the applications of the vertical gradient method and the quasi-step function approximation method in shallow waters(depth <200 m),the shelf break waters(about 200 m)and open seas(depth>200 m)were analyzed to solve the horizontal discontinuity of the thermocline calculations in the shelf break waters.
05℃/m,可以有效避免陆架坡折海域的水平不连续问题,与实际水文廓线符合较好。
3) Horizontal continuous casting
水平连续铸造
1.
The Horizontal Continuous Casting for Extra\|Large Aluminum Bus;
大型导电铝母线的水平连续铸造
2.
The use abilities of casting shell and caster, casting speed, casting temperature, cooling speed are thekeys of horizontal continuous casting.
结晶器、连续铸造机的使用性能以及铸造速度、铸造温度、冷却强度等工艺参数是决定水平连续铸造成败和铸锭质量的重要因素。
3.
In this paper, technology of AZ31 mg alloy horizontal continuous casting(HCC) was introduced, macrostructure and microstructure characteristics of AZ31 mg alloy plates formed by horizontal continuous casting were studied, and effects of homogeneous heat treatment on microstructures and mechanical properties of AZ31 plates were also analyzed.
本文介绍了AZ31镁合金水平连续铸造(Horizontal Continuous Casting)工艺的特点,研究了AZ31镁合金水平连续铸造板坯的宏观及微观组织特征,分析了均匀化退火对板坯微观组织及力学性能的影响。
4) level continuous blowing
水平连续发泡
5) direct chill cast
水平半连续铸造
1.
The semi solid ZL101A alloy billet with non dendritic structure was prepared by direct chill cast combined with electromagnetic stirring method (EMS DC method).
在优化各工艺参数的基础上 ,形成了半固态ZL1 0 1A合金的水平半连续铸造中试生产技术 ,其连铸坯铸态和热处理态强塑性综合指标分别为 430 。
6) continuous-resolution levels
连续分辨水平
补充资料：水平连续铸锭
水平连续铸锭
horizontal continuous casting
shu一Ping lianxu zhuding水平连续铸锭(horizontal。ontinuous。ast-ing)金属熔体在与地面平行安装的铸锭机上连续地被拉出结晶器的铸锭工艺。在有色金属及合金铸锭生产中水平连续铸锭已被广泛应用。这种铸锭方法的优点是:设备结构简单，安装方便及不用挖铸造井，使投资费用降低;浇注速度快，辅助时间短，大大地提高了生产率。 水平连续铸锭机主要是由中间包和一个安装在中间包垂直侧面的结晶器以及引锭机构和同步锯切装置等组成的。铸锭时，首先将引锭杆放入结晶器中，熔体金属通过中间包注入到结晶器后，金属与引锭杆前端凝固在一起，此时启动引锭拉辊，引锭杆以匀速将金属锭从结晶器中拉出。待铸锭达到一定长度后，同步锯床便在铸锭运行中将铸锭切断。铜合金水平连续铸锭装置如图所示。铜合金水平连续铸锭时，由于铸造温度沪嘛 铜合金水平连续铸锭装置 1一保温炉;2一结晶器;3一中间包; 4一引锭机构;5一同步锯高，结晶器壁易与氧化锌一类的凝结物粘连，严重地危害铸锭表面质量。因此，铜合金水平连铸时连铸机的引锭拉辊采取拉一停结合的周期性间歇式的方式工作。这种引锭方式可有效地防止铸锭与结晶器壁间的沾连，有助于改善铸锭表面质量。 (郎振簇)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条