1) taper trapezium threads
圆锥梯形螺纹
1.
The paper analyzes the characteristics of the experiment well and the special con- nection form of the FRP wound! well pipes,and it is a new idea that the taper trapezium threads are used as the connection,the paper also describes in detail the design of FRP wound well pipe itself and the taper trapezium threads that can bear 2～8×10~4N function force from the axial di- rection.
本文通过对试验井的特点及其对玻璃钢管道的特殊要求进行分析,提出了利用与玻璃钢管道一体的圆锥梯形螺纹,作为解决管道之间连接方式的新思路；对能承受20～80KN 轴向作用力的玻璃钢本体与圆锥梯形螺纹的设计,做了详细阐述；最后推导出管道本体和受力连接螺纹强度设计、螺纹螺旋线总长等通用计算公式。
2) taper thread
圆锥形螺纹
3) trapezoidal thread tap
梯形螺纹丝锥
4) taper thread plug
圆锥螺纹
1.
With the development of industry,there are more requirements of accaracy of taper thread plug gauge s manufacture.
随着现代工业的发展,对圆锥螺纹塞规的加工精度提出了更高的要求,如何提高圆锥螺纹塞规的测量准确度成为必须解决的重要课题。
5) trapezoidal thread broaching tap
梯形螺纹拉削丝锥
补充资料：55°圆锥管螺纹型式和尺寸
| 螺纹代号 | 基本尺寸 英 寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 圆弧尺寸 r | 底孔尺寸 mm |
| R 1/16 | 1/16＂ | 7.723 | 0.907 | 28 | 7.142 | 6.561 | 0.581 | 0.125 | 6.4 |
| R 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 0.125 | 8.4 |
| R 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 0.184 | 11.2 |
| R 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.950 | 0.856 | 0.184 | 14.75 |
| R 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 0.249 | 18.25 |
| R 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 0.249 | 23.75 |
| R 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 0.317 | 30 |
| R 1 1/4 | 1 1/4＂ | 41.910 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 0.317 | 38.5 |
| R 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 0.317 | 44.5 |
| R 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 0.317 | 56 |
| R 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 0.317 | 71 |
| R 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 0.317 | 85.5 |
| R 4 | 4＂ | 113.030 | 2.309 | 11 | 111.551 | 110.072 | 1.479 | 0.317 | 110.5 |
| R 5 | 5＂ | 138.430 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 0.317 | 136 |
| R 6 | 6＂ | 163.830 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 0.317 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条