1) laser overlap cladding
激光搭接熔覆
1.
Microstructure of nickel based nanometer WC/Co composite coating prepared by laser overlap cladding;
钢表面激光搭接熔覆镍基纳米WC/Co复合涂层的显微组织
2) laser overlapping cladding
搭接熔覆
3) laser cladding
激光熔覆
1.
In-situ synthesis of Co_p/Cu composite coating by laser cladding;
激光熔覆原位合成Co_p/Cu复合涂层
2.
Research progress of laser cladding on the surface of magnesium alloys;
镁合金表面激光熔覆研究现状
3.
Influence of rare earths on Fe-based amorphous composite coatings by laser cladding;
稀土RE对激光熔覆Fe基非晶复合涂层的影响
4) laser-cladding
激光熔覆
1.
Research of preventing the edges of tooth surface from collapsing in laser-cladding process;
齿面激光熔覆中的防边缘塌陷工艺研究
2.
Microstructure and Tribology Characteristics OF Laser-cladding Composite Ceramic Coating;
纳米复合陶瓷涂层激光熔覆后的组织与耐磨性能
3.
The WC–Ni–P composite coatings were made by laser-cladding on 1045 steel substrate.
利用激光熔覆技术在45钢表面制备了WC/Ni–P复合涂层,在Plint TE–66微磨料磨损试验机上进行了磨损试验,研究了不同稀土含量(CeO2)以及不同粒度WC粉末对涂层熔覆性能、硬度和磨损性能的影响。
5) laser clad
激光熔覆
1.
Microstructure and wear resistance of laser clad layer of TiN on TC4 alloy;
TC4合金表面TiN陶瓷激光熔覆层的组织和耐磨性能
2.
Effect of nano-CeO_2 on the microstructure and properties of laser clad nickel-based alloy coating;
纳米CeO_2对激光熔覆Ni基合金层组织与性能的影响
3.
Study of laser cladding three pre-placed powders on titanium alloy;
钛合金表面三种预涂材料的激光熔覆研究
6) laser coating
激光熔覆
1.
Experimental investigation of cracking behaviors in laser coating of Ni-based WC composite;
Ni基WC金属陶瓷激光熔覆开裂特性的试验研究
2.
The organization of laser coating thermal influence region of steel 20 in annealing and quenching is studied.
本文研究了 2 0钢退火态 ,淬火态激光熔覆热影响区的组织 ,电镜复型照片显示 ,在 30微米的热影响区内组织变化呈明显的规律 ,熔覆层与基体间有明显的界
3.
On the basis of an analysis on the feeding pattern of the coating material and its behavior in the laser beam during the process of laser coating with automatic powder feeding, a heat equilibrium equation was established and expressions relating the parameters in the process were obtained.
在分析自动送粉式激光熔覆过程中熔覆材料颗粒加入方式及其在激光束中的行为的基础上，建立热平衡方程，推导出反映熔覆过程实际情况的参数：熔覆材料颗粒尺寸、在激光束中运动距离、加热温度、激光功率密度之间的相互关系式等。
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条