1) fractional melting characteristic
分熔特性
1.
Some study work and theoretic analysis about correlativity between coating s fractional melting characteristic and content of final slag was done.
本文首次提出基于分熔理论的转炉终渣调整思路,打破了传统的低氧化铁、高氧化镁的炉渣调整方法,对溅渣层的分熔特性与终渣成分的相关关系进行了实验研究和理论分析,确定了适于溅渣护炉的合适终渣成分,为溅渣护炉水平的进一步提高指明了方向。
2) melting property
熔化特性
1.
Microstructure and melting property of Sn-2.5Ag-0.7Cu-XGe solder;
Sn-2.5Ag-0.7Cu-XGe钎料显微组织与熔化特性
2.
An experimental research on melting property of high speed casting mold powders;
高速连铸保护渣熔化特性的实验研究
3.
Melting property of alloys was studied by DSC.
采用差示扫描量热仪研究了合金的熔化特性。
3) melting characteristics
熔融特性
1.
Effect of char on the melting characteristics of coal ash;
灰中焦对煤灰熔融特性的影响
2.
Dependences of melting characteristics of polypropylene on conditions of modulated DSC;
聚丙烯熔融特性与MDSC条件的相关性
3.
The melting characteristics and thermal expanson behavior of quartzite particles during heated-up were studied by using a thermal microscope (LEIAZ-Ⅱ)made in Germany.
使用由德国生产的LEIAZ-ⅡA型高温热显微镜对异密度循环流化床床料——石英砂在加热过程中所表现出的熔融特性和热膨胀特性进行了研究。
4) fusion characteristics
熔融特性
1.
Ash-fusion characteristics of wheat straw lignin and coal co-combustion;
麦草木素与煤混烧灰熔融特性
2.
Study on coal ash fusion characteristics with TG-DSC method;
利用TG-DSC方法研究煤灰熔融特性
3.
Studied are the ash fusion characteristics obtained from the mixed incineration of 1.
研究3种不同灰熔融性的煤(元宝山褐煤、崔家沟烟煤、徐州烟煤,分别简称为Y煤、C煤和X煤)与不同含盐率(碱金属钠盐Na2SO4、NaNO3、Na2CO3等在红水中的含量,通称含盐率)化工废液红水混合焚烧的灰熔融特性。
5) Cladding characteristics
熔覆特性
1.
Comparison of cladding characteristics on CO_2 laser,Nd:YAG laser and excimer laser;
CO_2激光、Nd:YAG激光和准分子激光熔覆特性的比较
2.
Cladding characteristics of excimer laser is discussed.
探讨了准分子激光的熔覆特性,实验表明:准分子激光瞬时产生很高的功率密度,具有很高的温度梯度。
6) Melting characteristics
熔化特性
1.
The artificial neural network model for predicting the melting characteristics of the cellulose electrode was trained using the uniform design samples.
利用VB语言开发了均匀设计软件并进行配方均匀设计试验,对神经网络模型的建立进行了详细的研究,用均匀设计的样本对建立的预测纤维素型焊条熔化特性的人工神经网络模型进行训练,试验结果表明:该模型可根据药皮成分对焊条熔化特性进行较为准确的预测。
2.
Effects of Ga on melting characteristics and wetting properties of Sn9Zn lead-free solder as well as the mechanical properties of the soldered joints were investigated,respectively.
研究了合金元素Ga的添加量对Sn-9Zn无铅钎料熔化特性、润湿性能及其焊点力学性能的影响。
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条