说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 碳化钒颗粒
1)  VC particulate
碳化钒颗粒
2)  WC particle
碳化钨颗粒
1.
WC particle reinforced high chromium cast iron (Cr20) matrix compound roller has been prepared successfully by means of centrifugally cast spraying.
采用离心铸造喷射法成功制备了碳化钨颗粒增强高铬铸铁(Cr20)基复合材料轧辊,对其进行了磨损性能试验及显微组织分析。
2.
WC particle reinforced cast iron matrix composites are manufactured by the vacuum infiltration technique.
采用真空负压工艺获取碳化钨颗粒增强铁基表面复合材料 ,分析复合层微观组织结构 ,并模拟实际工况考察复合层的抗浆料冲蚀磨损性能。
3.
This thesis fabricated successfully a WC particle reinforced iron matrix composite using a vacuum infiltration process for severely erosion and application in the slurry pump.
本文针对承受严重冲蚀磨损的渣浆泵过流件,采用负压铸渗工艺成功制备了碳化钨颗粒增强铁基表面复合材料,改善和优化了复合工艺、铸造工艺。
3)  SiC particle
碳化硅颗粒
1.
Using presetting methods of coated preform,SiC particle reinforced steel matrix surface composites were prepared by vacuum evaporative pattern casting(V-EPC)infiltration.
结果表明:碳化硅颗粒粒径在600~850μm时,制备的复合材料表面复合效果好,铸渗复合层厚度可达4 mm左右,表面较平整;碳化硅颗粒粒径对SiC/钢复合材料表面质量有很大的影响,随着SiC颗粒粒径的增加,复合材料铸渗层的表面质量呈下降趋势。
2.
Progress in research of SiC particle reinforced Al-based matrix composites is reviewed;material selection,manufacturing process and mechanical properties were discussed.
综述了碳化硅颗粒增强铝基复合材料的国内外研究现状,从材料的选择、制备技术和性能等方面,分析了该材料发展过程中存在的一些问题以及相应的改进措施,并且指出了该材料今后发展的几个方向。
3.
The method for measuring the porosity of stirring cast made SiC particle reinforced aluminum matrix composites is introduced in this paper.
阐述了搅拌铸造制备碳化硅颗粒增强铝基复合材料孔隙率的测定方法,分析了复合材料中形成孔隙的原因和影响因素,并从真空度、搅拌杆形状、搅拌时间、浇注系统设计、浇注方式、改善SiC和基体界面浸润性等方面,探讨了降低搅拌铸造制备铝基复合材料孔隙率的措施和方法。
4)  B4C particles
碳化硼颗粒
1.
In order to compare the tribological properties of two aluminum matrix composites reinforced by different content of B4C particles,the pin samples were prepared with them and friction and wear tests of pin-on-steel disc were carried out on a multifunctional tribometer.
为了比较两种含量不同的碳化硼颗粒增强铝基复合材料的摩擦学性能,将其加工成销试样,在多功能摩擦磨损试验机上分别与钢盘试样进行对比摩擦磨损试验,重点研究了接触载荷和相对滑动速度对两种复合材料摩擦磨损性能的影响。
5)  SiC particles
碳化硅颗粒
1.
The result revealed that SiC particles as solid solutions in casting surface are combined together with the alloyed matrix or steel substrate and the particle shapes are kept intact and uniformly distributed,thus forming metallurgical bonding between wear-resistant coating and matrix.
对复合材料微观组织结构分析表明,碳化硅颗粒表面固溶于基体材料组织中,粒形基本保持完整,分布均匀,与基体构成冶金结合。
6)  SiCp
碳化硅颗粒
1.
Current status of development and application in SiCp/Al composites;
碳化硅颗粒增强铝基复合材料开发与应用的研究现状
补充资料:碳化钒
分子式:
CAS号:

性质:银白色晶体。密度5.25~5.4g/cm3。熔点2750℃。比石英略硬。可由五氧化二钒用焦炭还原制得。主要用于制造钒钢。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条