2) ceramic beads
陶瓷小珠
1.
By coupling 5-NH 2/3-Tex terminus modified single stranded DNA probes on the surfaces of 300 μm ZrO 2 ceramic beads through N-(4-maleimidobutyryloxy)-sulfosuccininimide (Sulfo-GMBS), fluorescent ceramic beads were prepared.
以N ( 4 马来酰亚胺氧化丁酰 ) 琥珀酰亚胺磺酸钠盐 (Sulfo GMBS)为偶链剂将 5 NH2 /3 Tex双末端修饰DNA探针偶链到 3 0 0 μmZrO2 陶瓷小珠表面上 ,制成了发红光的陶瓷小珠 。
2.
The microarray features of 5 - NH2/3 - Texas red terminus modified deoxyribonucleic acid (DNA) probes on the surfaces of 300 μm ZrO2 ceramic beads were characterized through the coupling reaction of the probes with N(4-maleimidobutyrvloxy) sulfosuccininimide sodium salt (sulfo-GMBS).
以Ｎ－（４－马来酰亚胺氧化丁酰）－琥珀酰亚胺磺酸钠盐（ｓｕｌｆｏ－ＧＭＢＳ）为偶联剂将５’－氨基／３’－得克萨斯红双末端修饰ＤＮＡ探针偶联到３－（２－氨乙基氨丙基）三甲氧基硅烷（ＡＡＴＳ）修饰的３００μｍＺｒＯ２陶瓷小珠表面，制成荧光小珠。
3) ceramic parts
陶瓷零件
1.
The process of the ceramics'manufacturing was analyzed by the material's process control theory in this article,the effects of process control on tolerance and size of 95 Al_2O_3 ceramic parts were concluded,and the energy distribution and the all-round consideration in the manufacture of ceramics were discussed.
本文尝试运用材料学过程理论对陶瓷制造过程进行了分析,进而总结分析了影响95%氧化铝陶瓷零件形位公差尺寸的工艺因素,讨论了陶瓷制造过程的能量分配问题和统筹兼顾问题。
2.
The development status of the machine tools about rapid prototyping manufacturing for ceramic parts is simply introduced.
简述了陶瓷零件快速成形设备的发展状况,介绍了基于陶瓷零件层合速凝技术所设计的一种陶瓷零件快速成形设备铺料机构的基本结构、工艺流程和工作原理,设计了该设备铺料机构PLC控制系统。
3.
According to the patent about rapid prototyping technology of ceramic parts,a new feed device was designed under the guidance of TRIZ theory.
根据一种陶瓷零件快速成形的专利技术,应用TRIZ理论设计了一种新的铺料装置,克服了铺料效率低,质量差的缺点。
4) ceramic objects
陶瓷器件
5) ceramic element
陶瓷元件
1.
Preparation and characterization of heater -type o - dimethylbenzene Sensitive ceramic element with TiO2/MoO3 complex thick film;
旁热式TiO_2/MoO_3复合厚膜邻二甲苯气敏陶瓷元件的制备及特性表征
6) ceramic part
陶瓷零件
1.
Plasma-spray Method for Forming Ceramic Parts;
销模式等离子熔射成形法制造陶瓷零件
2.
Study of control system of paving stock mechanism of new-type machining tool about rapid prototyping manufacture for ceramic parts;
陶瓷零件快速成型机铺料机构控制系统的研究
3.
A new rapid manufacturing technology for ceramic parts was proposed.
提出了一种新的陶瓷零件快速制造技术。
补充资料：陶瓷管
分子式：
分子量：
CAS号：
性质：用陶瓷材料制成的管子。常用的主要是内外表面都上釉的陶质管，不透水，耐腐蚀性好，但不耐氢氟酸腐蚀，耐磷酸和碱液的腐蚀性也较差。性脆、强度低，不耐压，过去多用于排泄有腐蚀性的污水，也用于输送有压力和温度不太高的腐蚀性液料。
分子量：
CAS号：
性质：用陶瓷材料制成的管子。常用的主要是内外表面都上釉的陶质管，不透水，耐腐蚀性好，但不耐氢氟酸腐蚀，耐磷酸和碱液的腐蚀性也较差。性脆、强度低，不耐压，过去多用于排泄有腐蚀性的污水，也用于输送有压力和温度不太高的腐蚀性液料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条