1) MQ
MQ
1.
Realization of MIS System Based on WebSphere MQ;
基于WebSphere MQ的MIS系统的研究与实现
2.
Installation and configuration of MQ in conformity edition of Station Management Information System;
车站管理信息系统整合过程中MQ的安装与配置
3.
Uses MB to integrate MQ with the other Message-Oriented Middleware;
使用MB将MQ与其它消息中间件产品集成
2) MQ
记忆商数
3) MQ
记忆商
1.
Before treatment, all patients memory quotient (MQ) was measured with Clinical Memory Scale, and it was measured again after 6 months treatment.
方法将120例老年痴呆患者分成对照组及尼莫地平治疗组,应用临床记忆量表,测查两组治疗6个月前后记忆商(MQ)。
4) MQ
快淬磁体
5) RC serles
RC串联
1.
revised by time constsnt in RC serles circuit temporary state experiment,it resolves the deviating problem from the measured τ-value to the computed τ-value.
对RC串联电路暂态实验中的时间常数测定计算进行了修正 ,较好地解决了测量值与计算值之间存在的误差问题。
6) MQ resin
MQ树脂
1.
The transparent LSR for textile trademarks was prepared by fumed silica and MQ resin as filler,dimethicone as attenuant.
以八甲基环四硅氧烷(D4)或甲基硅氧烷混合环体(DMC)、乙烯基双封头、乙烯基环体等为原料,四甲基氢氧化铵为催化剂,合成了高摩尔质量乙烯基硅油;以高含氢硅油、含氢双封头、六甲基二硅氧烷、D4等为原料,合成低含氢硅油交联剂;再加入白炭黑、MQ树脂填料,二甲基硅油稀释剂,制成纺织商标用透明液体硅橡胶。
2.
With MQ resin as reinforce filling materials,dimethicone as dilution agent,the transparency liquid silicone that used .
以D4或DMC、乙烯基双封头、乙烯基环体等为原料,以四甲基氢氧化铵为催化剂合成了不同摩尔质量的乙烯基硅油;以高含氢硅油、含氢双封头、六甲基二硅氧烷、D4合成实验所需的交联剂低含氢硅油;以白炭黑、乙烯MQ树脂为补强填料,以二甲基硅油为稀释剂制备纺织商标用透明液体硅橡胶。
3.
The reinforced LTV by MQ resin could be mixed with more than 2 fold of its self weight of this material into some specially filleres to prepare some specialized encapsulant,which could meet the combustion resistivity or heat conductivity requirements.
MQ树脂用作加成型液体硅橡胶 (LTV)的补强材料 ,可赋予LTV较好的机械性能、很好的流动性 ,对玻璃、陶瓷等材料较好的粘接性 ;经MQ树脂补强后的LTV可加入自重 2倍以上的特种填料 ,制成能满足阻燃或导热等特殊性能要求的灌封
参考词条
MQ evaluation
MQ problem
MQ coder
MQ algorithm
Websphere MQ
MQ coder
MQ-coder
MQ-codec
MQ workflow
MQ function
MQ function
Multiquadric (MQ)
multiquadric(MQ)
MQ-crytosystem
MQ decoder
上肢/外科学
离断式肾盂输尿管成形术
补充资料:MQ
分子式:
CAS号:
性质:经真空熔炼成的Nd-Fe-B永磁合金,以熔融状态处在惰性气氛保护的石英坩埚中,当在压力作用下经过容器底部细孔喷射到高速旋转的水冷铜辊的外缘上,以105~106℃/S速度冷却,形成非晶态或微晶的窄薄带,再制成粉,由此制成的磁体称为快淬磁体。有利于生产过程自动化、连续化;产品内禀矫顽力及磁化强度都很高,缺点磁能积较低,一般60~80kJ/m3(8~10MGOe)。
CAS号:
性质:经真空熔炼成的Nd-Fe-B永磁合金,以熔融状态处在惰性气氛保护的石英坩埚中,当在压力作用下经过容器底部细孔喷射到高速旋转的水冷铜辊的外缘上,以105~106℃/S速度冷却,形成非晶态或微晶的窄薄带,再制成粉,由此制成的磁体称为快淬磁体。有利于生产过程自动化、连续化;产品内禀矫顽力及磁化强度都很高,缺点磁能积较低,一般60~80kJ/m3(8~10MGOe)。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。