1)  nucleus growth mechanism
成核生长机理
2)  Mechanism of kernel-forming and growth
成核生长机理
3)  nucleation and growing mechanism
成核-生长机理
1.
Results showed that phase separation was induced by nucleation and growing mechanism, exhibiting sea-island morpholo.
结果表明:该体系的相分离过程遵循的是成核-生长机理,形成海岛结构并且还是"原位"相分离,相分离后的聚砜微球沿着纳米纤维的"痕迹"有序排列。
4)  nucleation
成核
1.
Research on the Bubble Nucleation Theory during the Process of Foam Plastics——The shear energy theory of bubble nucleation and its development;
泡沫塑料加工过程中的气泡成核理论(Ⅱ)——剪切能成核理论及其发展
2.
Effects of Ultrasonic Excitation on Cell Nucleation in the Foam Molding Process;
泡沫塑料成型过程中超声波振动对气泡成核的影响
3.
Nucleation Theory of Physical Foaming of Microcellular Plastics;
微孔塑料物理发泡的成核理论
5)  Nucleating agent
成核剂
1.
Study on blend of polypropylene and polyethylene modified by nucleating agent;
成核剂改性聚丙烯共混体系的研究
2.
Current development of nucleating agent for clarified polypropylene;
透明聚丙烯成核剂的发展现状
3.
Effect of rare earth β nucleating agent on the properties of polypropylene;
稀土β晶型成核剂对聚丙烯性能的影响
6)  secondary nucleation
二次成核
1.
The secondary nucleation of sodium aluminate solutions treated with ultrasound during the decomposition was studied by analysing mass of aluminum hydroxide nuclei, whose diameter is between 1 μm and 3 μm.
通过对铝酸钠溶液种分过程中氢氧化铝粒径为1～3μm的粒子质量信息进行分析,考察了超声波强化处理对铝酸钠溶液二次成核的影响。
2.
The influences of the crystallization additive on the secondary nucleation and agglomeration were studied in seed precipitation process of sodium aluminate solution.
研究了结晶添加剂对铝酸钠溶液加种分解过程中的二次成核、附聚的影响 ,并把添加剂应用于工业铝酸钠溶液种分实验过程中 ,探讨其对产品氢氧化铝粒度、产率的影响。
参考词条
补充资料：成核生长机理
分子式：
CAS号：

性质：理想晶面上金属电结晶过程的理论。此理论认为，在理想平整的晶面上，由于不存在“生长点”，因此，晶体继续生长的前提是在晶面上出现新的晶核。晶核的形成是晶体生长过程的速率控制步骤。在未完成的理想晶面上，晶面的继续生长只能在少数占有最低能量位置的“生长点”或“生长线”上进行。金属离子在晶面上任一位置都可放电并形成“吸附原子”，然后通过扩散转移到“生长线”和“生长点”上。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。