1) mobile aluminum enclosure
手机铝合金外壳
1.
This paper based on a case about ixxxx mobile aluminum enclosure, describe a concrete application study of quality control tool , so as to define and control the critical quality point .
根据外壳工艺过程的潜在失效模式及效应分析,结果表明外壳的宽度尺寸,胶的粘接强度,表面电阻值大小是手机铝合金外壳工艺中的关键质量特性参数。
2) aluminium alloy casing
铝合金外壳
1.
The advantages of the production for the aluminium alloy casing with backward extruding technology replacing multi-pass ironing technology are marrated.
叙述了用反挤压工艺代替多道变薄拉伸工艺生产铝合金外壳的优点。
3) mobile phone shell
手机外壳
1.
Polycarbonate(PC) is a typical material used widely in mobile phone shell.
聚碳酸酯(PC)是手机外壳常用材料,它是一种综合性能优异的热塑性工程塑料,具有较高的回收价值。
2.
Polycarbonate (PC) is a typical material used widely in mobile phone shell.
聚碳酸酯(PC)是手机外壳常用材料,它是一种综合性能优良的工程塑料。
3.
Analyzed the molding process of the mobile phone shell,elaborated in detail structure design points and working process of the injection mold,through using core-pulling mechanism combined with fixed mold slide,moved mold slide and moved mold angle ejection,enchanced mold\'s service life and the reliability greatly.
分析了手机外壳塑件的成型工艺,详细阐述了该手机外壳注射模的结构设计要点与工作过程,通过采用定模滑块、动模滑块和动模斜顶相结合的抽芯结构,使得模具的使用寿命和可靠性大大提高。
4) mobile telephone shell
手机外壳
1.
Magnesium alloy mobile telephone shell were produced in dies designed by ourselves.
本文以AZ31B镁合金手机外壳的冲压模具设计和在普通机械式锻压机床上的冲压生产为例,对AZ31B镁合金冲压成形过程中的板材制备、冲压模具设计、模具及板材的温度、冲压变形速度、润滑剂的选用等关键技术做了较为系统的实验研究。
2.
Based on the design of the punching die for and manufacture of AZ31B magnesium alloy mobile telephone shell in common mechanic forging press,a relatively systematic experimental study was carried out on the key technology of the stamping forming of AZ31B magnesium alloy.
以AZ31B镁合金手机外壳冲模设计和在普通机械式锻压机上的冲压生产为例,对AZ31B镁合金冲压成形过程中的板料制备、冲模设计、模具及板料的温度、冲压变形速度、润滑剂的选用等关键技术作了较为系统的实验研究。
5) cell phone shell
手机外壳
1.
The key structure design points and operation process of an injection mould for a cell phone shell were stated after analyzing the forming technique of the part.
分析了手机外壳塑件成型工艺,详细阐述了手机外壳注射模结构设计要点与工作过程,通过采用动模斜顶与斜导柱抽芯相结合的抽芯机构,使模具寿命和可靠性大为提高;为提高塑件质量,采用了二次顶出机构;并重点阐述了动模斜顶、斜导柱抽芯机构和二次顶出机构的设计要点。
6) aluminum alloy shell
铝合金壳体
1.
The paper briefly introduces the characters of warm extrusion and emphases on application advantages for parts of aluminum alloy shells and influencing factors on technological process.
简要介绍了温挤压技术的特点,重点介绍了该技术在铝合金壳体类零件上的应用优势和影响工艺过程中的各种因素,温挤压技术已成功推广应用于铝合金壳体类零件成形的批量生产之中,使生产成本降低25%,生产效率提高70%。
2.
The difficulty of aluminum alloy shell workpiece with empennages was analyzed during plasticity forming,and its forming process and die designing was introduced.
分析了带尾翼铝合金壳体零件在塑性成形过程中的难点,介绍了壳体零件的成形工艺与模具设计的方法。
补充资料：氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
J氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条