1) cast aluminum alloy housing
铸铝合金壳体
1.
The reason that delayed cracking appears on AL-SI series of cast aluminum alloy housing after it is welded up is analyzed,and the precaution measures are proposed.
分析了AL-SI系铸铝合金壳体在焊补后出现延迟裂纹的原因,提出了预防措施。
2) aluminum alloy shell
铝合金壳体
1.
The paper briefly introduces the characters of warm extrusion and emphases on application advantages for parts of aluminum alloy shells and influencing factors on technological process.
简要介绍了温挤压技术的特点,重点介绍了该技术在铝合金壳体类零件上的应用优势和影响工艺过程中的各种因素,温挤压技术已成功推广应用于铝合金壳体类零件成形的批量生产之中,使生产成本降低25%,生产效率提高70%。
2.
The difficulty of aluminum alloy shell workpiece with empennages was analyzed during plasticity forming,and its forming process and die designing was introduced.
分析了带尾翼铝合金壳体零件在塑性成形过程中的难点,介绍了壳体零件的成形工艺与模具设计的方法。
3) cast aluminum alloy
铸铝合金
1.
Influences of mains frequency on Micro-arc oxidation ceramic layer cast aluminum alloy;
电源频率对铸铝合金微弧氧化陶瓷层的影响
2.
A process of cast aluminum alloy electroplating was introduced in this paper.
介绍了一种铸铝合金电镀工艺,在前处理时,采用中性除油及酸性预镀铜工艺,应用在高压电器产品铸铝导体镀银工艺中,提高了铸铝合金导体镀银合格率。
3.
The density and composition of electrolyte were adjusted to lower the current density of micro arc oxidation (MAO) on cast aluminum alloy by the contrast experiment.
采用对比试验的方法,调整电解液组分及浓度,研究降低含有Si、Cu元素的铸铝合金、微弧氧化电流密度的电解液。
4) aluminum casting alloy
铸铝合金
1.
Mechanical properties and stretching rate loaded slowly of aluminum casting alloys;
慢加载时拉伸速率与铸铝合金的力学性能
2.
Simulating moist heat corrosion experiments were conducted on commercial pure aluminum and aluminum casting alloy, ZL102 and ZL109 respectively.
用模拟湿热腐蚀试验方法在工业纯铝、ＺＬ１０２和ＺＬ１０９合金表面诱发腐蚀，用ＳＥＭ、ＥＤＳ和ＸＲＤ等实验手段观察和分析了铸铝合金中第二相和腐蚀产物的微观形貌及化学成分，研究了第二相与表面缺陷对铸铝合金大气腐蚀发生机制的影响。
5) casting aluminum alloy
铸造铝合金
1.
This paper discusses the molybdenum blue spectrophotometer method to determine high silicon content in casting aluminum alloys by reducing the quantity of samples and relative silicon content.
探讨了铸造铝合金中高硅的钼蓝光度分析方法,通过采取减少试样引入量、减少硅的相对含量等方式,使 方法得以适用;提出了方法的最佳分析条件,从而使分析的结果在国家标准的误差范围之内。
2.
The effects of solid solution treatment and ageing on the mechanical properties and corrosion resistance of a new corrosion resistant casting aluminum alloy were introduced.
主要介绍了不同的固溶和时效处理制度对新型耐蚀铸造铝合金力学性能、耐蚀性能的影响 ,通过对金相组织观 察和能谱分析 ,结合相图进行了讨论 ,指出 Mg2 Si相的充分固溶和均匀析出是决定 Al- 2 Mg- 3Si合金综合性能的关键因素 ,并根据材料实际应用情况最终确定了该新型耐蚀铸铝的热处理制度。
3.
Through the improvement of traditional coloring technologies, a coloring technology for casting aluminum alloy to obtain a reddish brown color film was developed.
研究了着色液中 Cu Cl2 含量、着色时间等因素对铸造铝合金 ZL 1 0 5表面着赭红色效果的影响 ,并考察了膜的耐腐蚀性能。
补充资料：氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
J氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条