1)  USB
通用串口总线控制器
2)  universal
通用
1.
A study on m odel WGO2000series of universal stretcher;
WGD2000系列通用担架的研制
2.
Construct Universal Platform for Signal Condition of ATS;
自动测试系统通用信号调理平台构建
3.
A Universal Electronic Ballast Design Using a PSpice Model for T5 Fluorescent Lamp;
T5荧光灯的PSpice建模及基于该模型的一种通用荧光灯电子镇流器的设计
3)  general
通用
1.
The intelligent general test database application system;
智能化通用试题库应用系统
2.
Design of the General Remote Monitoring and Diagnosing System for Power Electronic Equipment;
通用电力电子设备远程监控与故障诊断系统设计研究
4)  general purpose
通用
1.
Since current typical data acquisition instruments are not adapted to different type or different range input signal,a kind of general purpose data acquisition interface instrument was developed.
针对目前典型数据采集装置输入端子对不同类型、不同范围的输入信号不能通用的状况 ,研究了一种通用数据采集接口装置。
2.
This paper describes the FPGA design of a general purpose and high speed Viterbi decoder which can be used in cdma2000 mobile communication system.
本文描述了一种可用于 CDMA2 0 0 0通信系统的通用高速维特比译码器基于 FPGA的设计与实现。
3.
To expand the realtime and embedded application of the neural network in industry control,general purpose neural netowrk processor(APP) based on multiple instruction stream and multiple data stream(MIMD) is paoposed.
为了能高速地实现多种神经网络,拓展神经网络在工业控制中的实时性、嵌入式应用,设计了一种多指令多数据流(MIMD)的通用型神经网络处理器(APP)。
5)  generality
通用
1.
Order-sheet expert system with better maintainability and generality for power network operation;
具有良好维护性和通用性的电网操作票专家系统
2.
The generality, advantage and credibility of the sytem are validated through this experiment ) and this system is worth using in other .
介绍了基于信息融合思想设计和开发的通用水电仿真系统,描述和总结了系统的功能组成、模型结构、系统配置、支撑环境及系统优点。
3.
The generality was the main characteristic of this module, and it also possessed many other merits, such as beauty, high efficiency, convenience and high reliability.
本文论述了光伏建筑组件国内外发展现状,结合建筑物的实际情况提出了一种新的光伏建筑组件,该组件具有通用性的特点,且具有美观、高效、方便、可靠等优点。
6)  common
通用
1.
Through the exploitation practice of common Test Base Management System, the important role of Test Base Management System in teaching and testing, the system s design programme and the ways of exploitation are discussed in this paper.
本文通过“通用试题库管理系统”的开发实践,论述了试题库管理系统在教学和考试中的重要作用,阐述了本系统的设计方案和开发途径。
2.
In the Local Area Network MIS which is designed for a Metallurgical Machinery Facto- ry,this paper designs a set of common command modules for improving the operating speed of the system and making the further development and extending easier.
在为某厂设计的局网信息管理系统中,为了提高网络运行速度,便于开发和扩充,设计了一组通用命令模块组。
参考词条
补充资料:总线控制器


总线控制器
bus controller

信号,并用这些信号对存储器和输人输出系统的地址锁存、数据收发、允许写和允许输出等进行控制。控制翰人信号控制箱出状态箱人 ┌───┐ │状态机│ └───┘┌──┐ │状态│ │解码│ └──┘ 命令拾出 图1总线控制器电路结构 使用总线控制器的数据允许1〕EN和数据收发Efl丫R信号控制数据总线收发器;其中,用DEN启动数据收发器,用D】丫豆控制数据收发器的方向。利用对DEN和I〕T/R的定时控制,可以避免总线主控设备、数据总线收发器等的总线争用。 利用允许地址锁存ALE的输出确定对地址锁存的时间。从前一个总线操作完成到下一个总线操作出现在锁存器输出端为止,ALE至少要提供一个系统地址保持时间。利用该保持时间,支持多总线和公用存储系统。另外,系统命令的延迟也受到总线控制器的控制。命令延迟信号允许增加地址或写数据的时间,以便系统总线命令借助延迟完成各种总线操作。 使用总线控制器,是为了解决CPU控制负载过重与外引线数目受限制等问题。它使CPU仅产生状态信号,不直接产生控制存储器或1/0电路的读写信号。在构成系统时,就需要总线控制器译码状态信息,从而产生能直接控制驱动存储器和1/0读写的信号。由于总线控制器需要较高的负载能力,因此,一般采用双极型电路。 典型的总线控制器产品为82 C 288,它采用高速CHM()S技术。其主要功能有:提供局部总线和系统总线命令和控制,单+SV电压,全静态器件,与HM(万技术的82288全兼容。zongxian kongzh.qi总线控制器(bus controller)计算机系统中用以代替中央处理器(CPtl),提供总线控制和命令信号的一种专用集成电路。一般情况下,CPU输出表征该总线周期要存取的设备的状态信号,通过总线控制器产生该总线周期所需的全部总线控制信号及命令输出信号,并对连在总线上的存储器和输人输出(I/O)设备进行控制。总线控制器也称系晚总伐挂润霖。 总线控制器的内部结构主要由状态解码、控制输人逻辑、状态机、控制输出逻辑和命令输出逻辑等组成,其电路结构如图1所示。控制输出提供允许地址锁存ALE、数据收发1〕1,/R、数据允许DEN等
说明:补充资料仅用于学习参考,请勿用于其它任何用途。