1) thermoelastic
热弹性体
1.
The research on classical problems for thermoelastic、piezothermoelastic and magneto-electro-thermo-elastic structures not only can provide the analytical solution for engineering applications but also acts as the necessary benchmarks for various approximate theories and calculation methods.
本文分别以热弹性体、压电热弹性体和电磁热弹性体为研究对象,研究它们在耦合载荷作用下的全场解析解。
2.
The research on axisymmetric classical problems for thermoelastic and piezothermoelastic structures not only can provide the analytical solution for engineering applications but also acts as the necessary benchmarks for various theories of thin plates and calculation methods.
本文分别以热弹性体和压电热弹性体为研究对象,研究它们在耦合荷载下的轴对称全场解析解。
2) Thermoplastic elastomer
热塑弹性体
1.
Progress of modification research of SBS thermoplastic elastomer;
热塑弹性体SBS的改性研究进展
2.
NBR/HDE thermoplastic elastomer was prepared by dynamically vulcanized.
用动态硫化方法制备了NBR／HDPE共混型热塑弹性体，电子显微镜研究其形态表明，尽管NBR的用量超过了HDPE，但NBR仍为分散相，HDPE为连续相，使该材料表现出热塑性。
3) TPE
热塑弹性体
1.
THE COMPATIBILIZED CROSSLINKING TECHNIQUES OF DYNAMICALLY VULCANIZED TPEs;
动态硫化共混型热塑弹性体的增容交联技术
2.
Development of TPE for Li/MnO_2 button cell;
Li/MnO_2扣式电池热塑弹性体的研制
3.
The developments of thermopldstic eldstomers in the world are reviewed in this paper,including TPO,SBC,TPU,TPEE,TPAE etc.
本文综述介绍了国外热塑弹性体的进展，包括聚烯烃、苯乙烯、聚氮酯、聚酯、聚酰胺五大系列热塑弹性体。
4) Thermoplastic elastomers
热塑弹性体
1.
Polarization modification of SBS thermoplastic elastomers and its application;
SBS热塑弹性体的极性化改性及其应用
5) thermoplastic elastomer, TPE
热塑性弹体
6) thermoplastic elastomers
热塑性弹性体
1.
Advancement of fully dynamically vulcanized EPDM/PP thermoplastic elastomers;
EPDM/PP热塑性弹性体研究进展
2.
Attempts were made to prepare thermoplastic elastomers (TPEs) based on linear low density polyethylene (LLDPE) and ground tire rubber (GTR) with dynamic vulcanization.
通过红外光谱、热分析(DSC)和扫描电镜(SEM)对共混物的热行为和表面形态研究表明,加入DCP交联剂使LLDPE、SBS和胶粉之间发生了交联反应,从而增加了胶粉颗粒与LLDPE间的界面相容性,使其热塑性弹性体的力学性能得以提高。
3.
TPE can act as a substitute of rubber in many applications especially in automobile industry in China, which is developing in full speed offering ample potentials for the development of various thermoplastic elastomers.
热塑性弹性体 (TPE)是一类应用广泛兼具有橡胶和塑料特性的高分子材料。
补充资料：热塑弹性体热熔胶
分子式：
CAS号：
性质：热塑弹性体包括许多微区结构聚合物，如聚氨酯，SBS，SIS等。SBS是苯乙烯-丁二烯-苯乙烯嵌段，SIS是苯乙烯-异戊二烯-苯乙烯嵌段，这类嵌段共聚体是热塑性的，当冷却时又回复2相形态和弹性，特别适用于热熔压敏胶黏剂。做热熔胶时常加入工艺油降低黏度，加入2种增黏剂，一种与二烯或脂肪嵌段相混溶，而另一种增黏剂溶混并增强聚苯乙烯嵌段，这种增黏剂包括α-甲基苯乙烯聚合物和氧茚树脂。一般还添加少量抗氧剂。
CAS号：
性质：热塑弹性体包括许多微区结构聚合物，如聚氨酯，SBS，SIS等。SBS是苯乙烯-丁二烯-苯乙烯嵌段，SIS是苯乙烯-异戊二烯-苯乙烯嵌段，这类嵌段共聚体是热塑性的，当冷却时又回复2相形态和弹性，特别适用于热熔压敏胶黏剂。做热熔胶时常加入工艺油降低黏度，加入2种增黏剂，一种与二烯或脂肪嵌段相混溶，而另一种增黏剂溶混并增强聚苯乙烯嵌段，这种增黏剂包括α-甲基苯乙烯聚合物和氧茚树脂。一般还添加少量抗氧剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条