1) the maximum heated-treatment temperature
最高热处理温度
2) high temperature treatment
高温热处理
1.
Study on the effects of high temperature treatment on performance of C/C composites;
高温热处理与C/C复合材料性能关系研究
2.
Effect of high temperature treatment on properties of polyimide films;
高温热处理对聚酰亚胺薄膜性能的影响
3.
The effects of different carbon coatings and high temperature treatment on the flexural strength and fracture modes of C/C-SiC composites were studied.
以针刺整体炭毡为坯体 ,采用CVD和树脂浸渍 /炭化混合法增密制备了 4种C/C多孔体 ,然后熔硅浸渗C/C多孔体制备了C/C SiC复合材料 ;研究了不同炭涂层、高温热处理对C/C SiC复合材料弯曲强度和断裂方式的影响。
3) high temperature heat treatment
高温热处理
1.
The influence of high temperature heat treatment on microstructure and microhardness of (DS)NiAl-Cr(Mo)-Hf eutectic alloy fabricated with directional solidification under high temperature gradient was investigated.
采用高温度梯度定向凝固装置制备NiAl-28cr-5Mo-1Hf(原子分数,％,下同)共晶合金,研究了高温热处理对合金显微组织和显微硬度的影响。
2.
The high temperature heat treatment technology and graphitization apparatus are the key in the manufacture of graphite fiber.
从高温热处理技术方面介绍了碳纤维在石墨化过程中微观结构的变化和宏观力学性能的改变。
3.
It was pointed out that the high temperature heat treatment method is the key factor preparing HMCF.
指出高温热处理是制备高模量碳纤维的关键技术；介绍了制备 PAN 基高模量碳纤维的 3 种高温热处理技术。
4) high-temperature heat treatment
高温热处理
1.
Influence of high-temperature heat treatment on the oxidation inhibition of PAN-based carbon fibers;
高温热处理对PAN基炭纤维抗氧化性的影响
2.
In order to improve the oxidation resistance of C/C composites,carbon felt was treated by high-temperature heat treatment with addition of boric acid.
采用对碳纤维毡体添加硼酸高温热处理的方法提高C/C复合材料的整体抗氧化性,考察了添加硼酸高温热处理的C/C复合材料和未经处理的C/C复合材料的氧化行为。
5) heat treatment temperature
热处理温度
1.
Effects of heat treatment temperature on the preparation of nanometer TiO_2 by melt-phase separation process;
热处理温度对熔融分相法制备纳米TiO_2影响的研究(英文)
2.
Study on heat treatment temperature of EMD used for Li-MnO_2 batteries;
Li-MnO_2电池用EMD热处理温度的研究
3.
Influence of heat treatment temperature after the pressure expansion on the electromechanical properties of cellular polypropylene electret;
压力膨化后的热处理温度对PP蜂窝膜驻极体机电性质的影响
6) heating temperature
热处理温度
1.
The influences of precursor,oxygen pressure and heating temperature on the microstructure and properties of the thin films have been discussed.
综述了采用软化学方法制备VO2薄膜的工艺技术特点,以前驱物的划分为主线,着重探讨了前驱物的选择、氧分压和热处理温度等工艺条件对其物相结构与性能的影响,对反应热力学进行了初步的探讨。
补充资料：铂电阻温度表(见电阻温度表)
铂电阻温度表(见电阻温度表)
表。bod旧nZu wendubiao铂电阻温度表见电阻温
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条