1) Dummy Stiffness Element
虚拟刚度单元
2) Fictitious element with variable rigidity
虚拟变刚度单元
3) virtual element
虚拟单元
1.
Component mode synthesis method based on virtual elements
基于虚拟单元的模态综合法
2.
In this paper,the method of virtual element and generalized initial stress is presented for developing software on FEM analysis of geotechnical excavation.
结合岩土工程有限元分析软件开发的需要,提出单元开挖问题处理的虚拟单元广义初应力法,并基于该方法设计分步开挖问题数值分析算法,应用该方法编制的程序对一分步开挖问题进行了数值模拟分析,提出了虚拟单元广义初应力方法在岩土工程有限元分析软件设计及编程等方面的特点。
4) element stiffness
单元刚度
1.
To study the dynamic response performance of reinforced concrete frame structure with friction energy dissipation braces,the element stiffness and mechanics model of the element of friction energy dissipation device and the element of frame bar are analyzed.
为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。
2.
The element stiffness matrix of the space circular curved beam for right-angled coordinate with the flexibility method are derived, a computer program including this kind of element for analysing the internal force of space frame is worked out and two engineering examples are calculated.
利用力法推导出直角坐标下空间圆弧形曲梁的单元刚度矩阵,编制了含此类单元的空间刚架内力计算程序,并计算了工程实例。
5) virtual bar element
虚拟杆单元
1.
A 4-node reference surface plate/shell element combining with a virtual bar element is employed to numerically solve the nonlinear buckling equations using a revising arc-length iteration scheme.
基于Mindlin假定下的大变形板/壳理论,采用参考面单元和虚拟杆单元相结合的非线性有限元方法,建立了分析含多个穿透分层损伤层合板后屈曲行为的有限元计算模型,并给出了考虑接触后非线性屈曲方程的迭代算法,从而研究考虑层间接触效应的多分层层合板的后屈曲性态。
2.
The delaminated composite panel is simulated by a reference surface finite element combining with a virtual bar element to avoid the overlapping between two sublaminates at the delamination front.
基于Mindlin假定下大变形的板/壳理论,采用参考面单元和虚拟杆单元相结合的非线性有限元方法,建立了分层损伤层合板后屈曲分析的有限元计算模型,并研究了考虑层间接触效应的单分层层合板的后屈曲性态。
3.
A FE model of composite beam embedded with double through thickness delaminations is constructed using the technology of reference surface finite element and virtual bar element.
采用参考面单元技术并引入虚拟杆单元,建立了含多个分层层合梁屈曲分析的有限元模型,通过数值实验验证了模型的正确性。
6) virtual element method
虚拟单元法
1.
Based on the analysis of calculation examples of centripetal seepage problem and flat-bottomed dam foundation seepage,it is shown that the discharge calculation with virtual element method will get a high precision.
提出了计算渗流场流量的虚拟单元法,推导了虚拟单元法有限元方程,并探讨了虚拟单元法的有限元实现方法,建立了虚拟单元法求解渗流流量的理论和方法体系。
补充资料：JPZ型三向等刚度橡胶减震器
分子式：
CAS号：
性质：JPZ-type tridirective equal rigid rubber mounting 橡胶减震器的一种。具有x、y、z三个方向等刚度、等自震频率。按负荷大小可分为JPZ-1、JPZ-2两种型号。由中央金属芯柱、伞形金属罩及橡胶连接而成，模压法生产。可满足导弹控制仪等设备的隔震和抗冲击要求。
CAS号：
性质：JPZ-type tridirective equal rigid rubber mounting 橡胶减震器的一种。具有x、y、z三个方向等刚度、等自震频率。按负荷大小可分为JPZ-1、JPZ-2两种型号。由中央金属芯柱、伞形金属罩及橡胶连接而成，模压法生产。可满足导弹控制仪等设备的隔震和抗冲击要求。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条