1) virtu-al lamina beam element
虚拟层合梁单元
2) virtual laminated element
虚拟层合单元
1.
Application of virtual laminated element in the shape optimization of beam and arch;
虚拟层合单元在平面梁和拱形状优化中的应用
2.
By the method of transforming the node DOF of the space bar element to the node DOF of the space virtual laminated element,that is,the node of bar element need not fixed on the node of space solid element,the prestressed concrete structure were simulated together.
通过自由度变换,把空间杆单元的节点自由度用空间虚拟层合单元的节点自由度来表示,即杆单元的节点无需固定在体单元节点上,共同模拟了预应力混凝土结构。
3.
Based on the virtual laminated element theory and program,the concept of equivalent node force was adopt to make a program,with which the spatial effect induced by post successive pre-stress of a simply supported and continuous spread boxes bridge was analyzed.
采用等效节点力的概念,以虚拟层合单元程序为平台,分析推导了预应力空间效应分析的方法,并以此为基础,考查了一座先简支后连续小箱梁桥后连续预应力张拉引起的结构空间效应。
3) virtual laminated element method
虚拟层合单元法
1.
The effect of prestressed steel bars on bridge structure is transformed to the equivalent loads,then an approach of analyzing prestressed concrete bridge is presented with virtual laminated element method.
通过将预应力束对桥梁结构的作用转化为等效荷载,提出了用虚拟层合单元法分析预应力混凝土桥梁的方法。
4) concealed coping
虚拟层合板单元
5) the virtual beam element model
虚拟横梁单元法
1.
In this paper,by the combination of four separate components of the 40m box girder single-span simply supported girder bridge as the research object, The solid element model and the virtual beam element model of the bridge are established by using the finite element software MIDAS/Civil,Every beam cross-displacement of the two calculation models in four kinds of load condition are compared.
得出了虚拟横梁单元法是分体式组合小箱梁桥的合适建模方法,可用于分体式组合小箱梁桥结构分析。
6) Virtual Laminated Shell Element Method
虚拟层合板壳单元法
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条