1) Method of Geometric Controlling Para
几何控制参数法
2) geometrical parameter method
几何参数法
1.
In order to realize the simulation of thermal forming for the total procedure for complex surfaces in short time,this paper described the fundamental characteristics and the processing properties for laser forming of metal sheets,and also suggested the geometrical parameter method by means of which the formed surface can be quickly created.
为快速模拟板材激光热成形全工艺变形过程,分析了板材激光成形的基本特征与加工特性,提出曲面几何学的方法与局部成形数据相互结合的曲面生成算法——几何参数法。
3) geometric control method
几何控制法
1.
The Application of Geometric Control Method in Construction Control of Long Span Steel Box Girder Cable-Stayed Bridge;
几何控制法在大跨度钢箱梁斜拉桥施工控制中的应用
2.
Geometric Control Method has many advantages, so its application is more and more widely in the cable-stayed bridge construction control.
几何控制法存在众多优点,在斜拉桥施工控制中应用越来越广泛。
4) geometric parameter
几何参数
1.
The effects of geometric parameters on axial shortening of inertia friction weldment in ring form;
几何参数对环件摩擦焊接轴向缩短量的影响
2.
Discussion about relationship between geometric parameters and grinding parameters of hyperboloid twist drill;
双曲面麻花钻几何参数与刃磨参数关系探讨
3.
Influence of the Geometric Parameters of the Molded Lines of Scroll Compressors on Their Friction Loss Power;
涡旋压缩机型线几何参数对其摩擦损失功率的影响研究
5) geometrical parameters
几何参数
1.
Some information of both electronic and geometrical parameters of these compounds were employed for their structural characterization.
利用电子参数(X_G)、几何参数(X)分别对40个酯、24个硫酯化合物进行结构表征并与其水解速率常数(k)建立多元线性定量构效相关(QSPR)模型：logk=a+b∑X_G+c∑X(式中a、b、c为系数)同时运用逐步回归结合统计检测对模型变量进行筛选,最后对所得模型稳定性能进行了深入分析和检验。
2.
It is necessary to extract molten pool geometrical parameters in real time or to extract back bead width off-line either in seam tracking or in penetration control.
不论熔透控制还是焊缝跟踪 ,都需要实时或离线提取焊接熔池正面或反面的几何参数 。
3.
Based on the coal impact breaking mechanism of impact coal cutter and considering the requirement of coal lump rate and dust etc, the determination of geometrical parameters of the impact tools has been analyzed.
根据冲击式采煤机的破煤原理 ,结合煤炭生产中对煤体块度、粉尘量、能量损失等方面的要求 ,分析了冲击式采煤机刀齿几何参数的确定方
6) Geometry parameter
几何参数
1.
17 molecular structures based on 2-OH azobenzene crystal structure data which retrieved from CSD have calculated and analyzed to their geometry parameters using FORTRAN program written by ourselves.
从剑桥晶体结构数据库(CSD)中系统地提取了17个邻羟基偶氮苯的晶体结构数据,用自编的FOR TRAN程序对它们的几何参数进行了计算。
2.
The applicable machining materials of PCBN cutting tools and rational selection methods for geometry parameters, cutting data and insert brands of PCBN cutting tools are introduced.
介绍了PCBN刀具适用的加工材料以及刀具几何参数、切削用量、刀片牌号的合理选择方法 ,针对PCBN刀具在实际加工中的常见磨损、破损形式提出了具体改善措
3.
The geometry parameters for electrical railway contact wire, height,stagger,etc, and the measurement principles are ex-plained.
介绍了电气化铁路接触网导高、拉出值等几何参数的意义和测量原理,提出了一种基于嵌入式系统的接触网多参数测量仪的设计方案,采用激光测距仪、旋转光栅编码器及辅助器材测量各几何参数,在液晶屏上显示计算结果。
补充资料：分布参数控制系统
分子式：
CAS号：
性质： 组成控制系统环节的参数一空间坐标有关的系统，系统采用偏微分方程来描述。
CAS号：
性质： 组成控制系统环节的参数一空间坐标有关的系统，系统采用偏微分方程来描述。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条