1) Ni-P electro-brush plating
刷镀Ni-P合金
2) Ni-W-P alloy coating
Ni-W-P合金镀层
1.
Study on the properties of Ni-W-P alloy coating;
Ni-W-P合金镀层性能研究
2.
The test results show that the Ni-W-P alloy coatings adhere to the substrate very well and have no pore when coating thickness reaches 15μm.
93wt％的Ni-W-P合金镀层。
3) Ni-Co-P alloy coaling
Ni-Co-P合金镀层
4) Ni-Cu-P coating
Ni-Cu-P合金镀层
1.
The results of polarization curve measurement show that self-corrosion current density of the Ni-Cu-P coating(4.
采用极化曲线和交流阻抗法,与Ni-P合金镀层对比,研究了化学镀Ni-Cu-P合金镀层在3。
5) Ni-P alloy coating
Ni-P合金镀层
1.
The corrosion behaviors of 45# carbon steel,1Cr18Ni9Ti,304 stainless steel,and Ni-P alloy coatings in sulfur-bearing solution were studied by potentiostatic polarization method and gravimetric method.
用失重法和恒电位极化法研究了45#碳钢、1Cr18Ni9Ti、304不锈钢和Ni-P合金镀层在含S介质中的腐蚀性。
2.
The corrosion rates of 45~# carbon steel,1Cr18Ni9Ti,304 stainless steel,and Ni-P alloy coatings in sulfer-bearing solution were studied by gravimetric method.
利用失重法研究了45#碳钢、1Cr18Ni9Ti、304不锈钢和Ni-P合金镀层在含硫介质中的腐蚀速率,采用JSM-6700F场发射扫描电子显微镜观察了微观腐蚀形貌。
3.
Ni-P alloy coatings were prepared by using five processes of electroless plating.
用五种化学镀工艺制备了Ni-P合金镀层。
6) electroless Ni-P alloy
化学镀Ni-P合金
1.
Present research status of process of electroless Ni-P alloy plating on magnesium alloys is reviewed in this paper,including zinc immersion and direct electroless Ni-P alloy.
综述了镁合金化学镀Ni-P合金工艺的研究现状,包括浸锌法、直接化学镀Ni-P合金,主要集中在化学镀Ni-P合金主盐的选择,添加剂的研究以及组合镀层的研究等。
补充资料：刷镀
分子式：
CAS号：
性质：一种改进型的刷镀技术，除不用电镀槽和阳极为惰性的电刷型“镀笔”外(这些与原来的刷镀类似)，其特点为：高浓电液；高电流密度(高速电镀)和采用便于控制的专用电源。该法适用于现场维修和制造，可获得高品质的部件。电刷镀有时仍简称刷镀，也有称之为涂镀或笔镀的。
CAS号：
性质：一种改进型的刷镀技术，除不用电镀槽和阳极为惰性的电刷型“镀笔”外(这些与原来的刷镀类似)，其特点为：高浓电液；高电流密度(高速电镀)和采用便于控制的专用电源。该法适用于现场维修和制造，可获得高品质的部件。电刷镀有时仍简称刷镀，也有称之为涂镀或笔镀的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条