3) Dental model measurement
牙牙合模型测量
4) Synthetic measurement
综合测量
1.
In order to settle the traditional tool s problems of limited precision and applicability, the technique of tractor crankshaft synthetic measurement based on virtual instrument is introduced.
提出了基于虚拟仪表的曲轴综合测量技术 ,为解决以往传统曲轴检测工具精度不够、针对品种单一等缺点提供了依据。
2.
With the rapid development of manufacture technologies, the synthetic measurement of profile with large range and high precision has become more and more imminent.
随着制造技术的快速发展,对各种零件表面轮廓进行大量程、高精度的综合测量的需求也越发迫切。
5) comprehensive measurement
综合测量
1.
The development and the present situation of the comprehensive measurement were introduced and the technique was surveyed in the way of theory analysis together with mathematics calculation and computer simulation to successive and switching variable separately.
本文介绍了综合测量技术的发展和现状，并采用理论分析、数学计算与计算机仿真试验相结合的方法，分别对连续量和开关量的综合测量技术进行研究。
6) summary measure
综合测量
1.
This paper explores,theoretically and empirically,the relationship between the two kinds of such summary measures(overall health achievement index),one of which is constructed on the basis of implicit value judgment(internal weighting method),the other on the basis of external weighting method imposing direct weights to the indicator of health level as well as health distribution.
健康水平和健康分布的综合测量具有重要的理论和政策意义。
2.
On the basis of the HOPIT adjusted self report health data collected from Jiading,Baoshan,Jinshan and Chongming,4 Districts of Shanghai,this paper presented the disability concentration index as the summary measure of the distribution of population self report health.
基于经HOPIT模型校正后的上海市嘉定、宝山、金山和崇明4区(县)的人群自报健康资料,应用伤残集中指数进行人群自报健康分布的综合测量研究。
3.
This paper presented the summary measure of the level of population self-report health on the basis of household health service survey eon-ducted in the Jiading, Baoshan, Jinshan and Chongming, 4 districts of Shanghai.
该测量基于上海市嘉定、宝山、金山和崇明4区(县)的家庭卫生服务调查中的自报健康资料进行人群自报健康水平的综合测量研究。
补充资料：长度测量工具:齿轮综合检查仪
利用双面嚙合法或单面嚙合法(见齿轮测量)测量齿轮精度的长度测量工具。齿轮综合检查仪分为双面嚙合检查仪和单面嚙合检查仪两种。
齿轮双面嚙合检查仪 简称双嚙仪﹐用於测量径向综合误差和齿轮副中心距变动等。图1 齿轮双面嚙合检查仪
为这种检查仪的外形。测量齿轮在弹簧力的作用下与被测齿轮作双面嚙合传动﹐后者的齿圈径向跳动﹑齿形误差等单项误差综合地反映为平行於导轨的径向变动量。量值由百分錶指示﹐或由记录器记录出误差曲线图。被测齿轮一转和转过一齿内的最大变动量分别为径向综合误差和径向一齿综合误差﹔一对被测齿轮配对测量所得最大变动量即齿轮副中心距变动。双嚙仪结构简单﹐测量效率高﹐广泛应用在大量生產中检验7级以下精度的齿轮。
齿轮单面嚙合检查仪 简称单嚙仪﹐用於测量切向综合误差等。单嚙仪可分为光栅式﹑磁栅式和惯性式几种。图2 光栅式齿轮单面嚙合检查仪
为一种光栅式齿轮单面嚙合检查仪。当测量齿轮带动被测齿轮转动时﹐由被测齿轮的周节﹑齿形﹑齿向﹑齿圈径向跳动等单项误差综合引起的转角误差﹐通过与被测齿轮同轴安装的圆光栅传感器转换成电信号输出。此电信号与测量齿轮同轴安装的圆光栅传感器输出的电信号分别经放大﹑整理﹑分频后进行比相﹐再由记录器记录出误差曲线图。这种齿轮检查仪一般用於测量5～6级精度的齿轮﹐配对测量时可以达到更高精度。
齿轮双面嚙合检查仪 简称双嚙仪﹐用於测量径向综合误差和齿轮副中心距变动等。图1 齿轮双面嚙合检查仪
为这种检查仪的外形。测量齿轮在弹簧力的作用下与被测齿轮作双面嚙合传动﹐后者的齿圈径向跳动﹑齿形误差等单项误差综合地反映为平行於导轨的径向变动量。量值由百分錶指示﹐或由记录器记录出误差曲线图。被测齿轮一转和转过一齿内的最大变动量分别为径向综合误差和径向一齿综合误差﹔一对被测齿轮配对测量所得最大变动量即齿轮副中心距变动。双嚙仪结构简单﹐测量效率高﹐广泛应用在大量生產中检验7级以下精度的齿轮。 齿轮单面嚙合检查仪 简称单嚙仪﹐用於测量切向综合误差等。单嚙仪可分为光栅式﹑磁栅式和惯性式几种。图2 光栅式齿轮单面嚙合检查仪
为一种光栅式齿轮单面嚙合检查仪。当测量齿轮带动被测齿轮转动时﹐由被测齿轮的周节﹑齿形﹑齿向﹑齿圈径向跳动等单项误差综合引起的转角误差﹐通过与被测齿轮同轴安装的圆光栅传感器转换成电信号输出。此电信号与测量齿轮同轴安装的圆光栅传感器输出的电信号分别经放大﹑整理﹑分频后进行比相﹐再由记录器记录出误差曲线图。这种齿轮检查仪一般用於测量5～6级精度的齿轮﹐配对测量时可以达到更高精度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条